Configuring Static Scheduling and Queuing in a Dynamic Profile for Subscriber Access

You can configure CoS in dynamic profile for subscriber access.

To configure CoS in a dynamic profile for subscriber access:

1. Configure static CoS parameters in the [edit class-of-service] hierarchy.
   1. Configure the scheduler map, forwarding classes, and schedulers.

      You reference the scheduler map in the dynamic profile.

   2. Configure drop profiles.
   3. Enable the hierarchical scheduler for the interface.

   See the JUNOS Class of Service Configuration Guide for information about configuring static CoS parameters.

2. Configure a static or dynamic subscriber interface.

   See Configuring Static Subscriber Interfaces in Dynamic Profiles and Configuring Dynamic Subscriber Interfaces Using IP Demux Interfaces in Dynamic Profiles.

3. Configure CoS parameters in a dynamic profile.
   1. Configure the dynamic profile.

      See Configuring a Basic Dynamic Profile.

   2. Configure traffic shaping and scheduling parameters in the dynamic profile using a traffic-control profile.

      Reference the scheduler map you configured in the static [edit class-of-service] hierarchy.

      See Configuring Traffic Shaping and Scheduling in a Dynamic Profile.

   3. Apply CoS parameters to a subscriber interface by referencing an interface in the dynamic profile.

      See Applying CoS to an Interface in a Dynamic Profile.

4. To configure default values for subscribers on login, and enable subscribers to replace other CoS parameters when replacing services, configure variables in the dynamic profile.

   See Configuring User-Defined CoS Variables in a Dynamic Service Profile.

Related Topics

• CoS for Subscriber Access Overview
• Example: Configuring Static Scheduling and Queuing for Subscriber Access