[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

exclude

Syntax



exclude {
accounting-authentic [ accounting-on | accounting-off ];
accounting-delay-time [ accounting-on | accounting-off
];
accounting-session-id [ access-request | accounting-on
| accounting-off | accounting-stop ];
accounting-terminate-cause [ accounting-off ];
called-station-id [ access-request | accounting-start |
accounting-stop ];
calling-station-id [ access-request | accounting-start
| accounting-stop ];
class [ accounting-start | accounting-stop ];
dhcp-gi-address [ access-request | accounting-start | accounting-stop
];
dhcp-mac-address [ access-request | accounting-start |
accounting-stop ];
output-filter [ accounting-start | accounting-stop ];
event-timestamp [ accounting-on | accounting-off | accounting-start
| accounting-stop ];
framed-ip-address [ accounting-start | accounting-stop
];
framed-ip-netmask [ accounting-start | accounting-stop
];
input-filter [ accounting-start | accounting-stop ];
input-gigapackets [ accounting-stop ];
input-gigawords [ accounting-stop ];
interface-description [ access-request | accounting-start
| accounting-stop ];
nas-identifier [ access-request | accounting-on | accounting-off
| accounting-start | accounting-stop ];
nas-port [ access-request | accounting-start | accounting-stop
];
nas-port-id [ access-request | accounting-start | accounting-stop
];
nas-port-type [ access-request | accounting-start | accounting-stop
];
output-gigapackets [ accounting-stop ];
output-gigawords [ accounting-stop ];
}

Hierarchy Level



[edit access profile profile-name radius attributes]

Release Information

Statement introduced in JUNOS Release 9.1.

Description

Configure the router to exclude the specified attributes from the specified type of RADIUS message.

Not all attributes are available in all types of RADIUS messages. By default, the router includes the specified attributes in RADIUS Access-Request, Acct-On, Acct-Off, Acct-Start, and Acct-Stop messages.

Options

RADIUS attribute type—RADIUS attribute or Juniper Networks VSA number and name.
RADIUS message type

Required Privilege Level

admin—To view this statement in the configuration.

admin-control—To add this statement to the configuration.