You can set the minimum number of links that must be up for the multilink bundle as a whole to be labeled up. By default, only one link must be up for the bundle to be labeled up. A member link is considered up when the PPP Link Control Protocol (LCP) phase transitions to open state.
The minimum-links value should be identical on both ends of the bundle.
To set the minimum number, include the minimum-links statement:
- minimum-links number;
You can include this statement at the following hierarchy levels:
For link services interfaces, you also can configure the minimum number of links at the physical interface level by including the minimum-links statement at the [edit interfaces ls-fpc/pic/port:channel mlfr-uni-nni-bundle-options] hierarchy level:
- minimum-links number;
The number can be from 1 through 8. The maximum number of links supported in a bundle is 8. When 8 is specified, all configured links of a bundle must be up.