[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

SRC-PE 2.0.x Network Guide > Configuring SRC Applications to Communicate with an SAE with the SRC CLI > Configuring Resolution Information for a NIC Proxy with the SRC CLI

Configuring Resolution Information for a NIC Proxy with the SRC CLI

Use the following configuration statements to configure a NIC proxy:

shared sae configuration nic-proxy-configuration name {

}



shared sae configuration nic-proxy-configuration name resolution {

    resolver-name resolver-name; 

    key-type key-type; 

    value-type value-type; 

    expect-multiple-values; 

    constraints constraints; 

}

To configure resolution information for a NIC proxy.

  1. From configuration mode, access the configuration statement that specifies the NIC proxy configuration. 
    2. [edit]

    user@host# edit shared sae configuration nic-proxy-configuration name 
resolution

For example:

[edit]

user@host# edit shared sae configuration nic-proxy-configuration ip resolution
  1. Specify the NIC resolver that this NIC proxy uses.
    2. [edit shared sae configuration nic-proxy-configuration ip resolution]

    user@host# set resolver-name resolver-name

This resolver must be the same as one that is configured on the NIC host. For example:

[edit shared sae configuration nic-proxy-configuration ip resolution]

user@host# set resolver-name /realms/ip/A1
  1. Specify the NIC data type that the key provides for the NIC resolution.
    2. [edit shared sae configuration nic-proxy-configuration ip resolution]

    user@host# set key-type key-type

For example:

[edit shared sae configuration nic-proxy-configuration ip resolution]

user@host# set key-type ip

To qualify data types, enter a qualifier within parentheses after the data type; for example, to specify username as a qualifier for the key LoginName:

[edit shared sae configuration nic-proxy-configuration ip resolution]

user@host# set key-type LoginName (username)
  1. Specify the type of value to be returned in the resolution for the application that uses the NIC proxy.
    2. [edit shared sae configuration nic-proxy-configuration ip resolution]

    user@host# set value-type value-type

For example:

[edit shared sae configuration nic-proxy-configuration ip resolution]

user@host# set value-type SaeId
  1. (Optional) If the key can have more than one value, specify that the key can have multiple corresponding values.
    2. [edit shared sae configuration nic-proxy-configuration ip resolution]

    user@host# set expect-multiple-values
  2. (Optional. Available at the Advanced editing level.) If the application provides a constraint in the resolution request, specify the data type for the constraint. The constraint represents a condition that must or may be satisfied before the next stage of the resolution process can proceed. 
    3. [edit shared sae configuration nic-proxy-configuration ip resolution]

    user@host# set constraints constraints
[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]