show route inactive-path
구문
show route inactive-path <brief | detail | extensive | terse> <logical-system (all | logical-system-name)>
구문(EX 시리즈 스위치)
show route inactive-path <brief | detail | extensive | terse>
설명
활성 경로가 없는 대상의 경로를 표시합니다. 비활성 경로는 최적 경로로 선택되지 않은 경로입니다.
옵션
none | 모든 비활성 경로를 표시합니다. |
brief | detail | extensive | terse | (선택 사항) 지정된 출력 수준을 표시합니다. 출력 수준을 지정하지 않으면 시스템은 기본적으로 |
logical-system (all | logical-system-name) | (선택 사항) 모든 논리적 시스템 또는 특정 논리적 시스템에서 이 작업을 수행합니다. |
필요한 권한 수준
보기
출력 필드
출력 필드에 대한 정보는 명령, 명령, show route detail
show route extensive
명령 또는 show route terse
명령에 대한 show route
출력 필드 테이블을 참조하십시오.
샘플 출력
경로 비활성 경로 표시
user@host> show route inactive-path inet.0: 25 destinations, 26 routes (24 active, 0 holddown, 1 hidden) Restart Complete + = Active Route, - = Last Active, * = Both 10.12.100.12/30 [OSPF/10] 03:57:28, metric 1 > via so-0/3/0.0 private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 10.0.0.0/8 [Direct/0] 04:39:56 > via fxp1.0 red.inet.0: 6 destinations, 8 routes (4 active, 0 holddown, 3 hidden) Restart Complete + = Active Route, - = Last Active, * = Both 10.12.80.0/30 [BGP/170] 04:38:17, localpref 100 AS path: 100 I > to 10.12.80.1 via ge-6/3/2.0 iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden) Restart Complete mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden) Restart Complete bgp.l3vpn.0: 3 destinations, 3 routes (0 active, 0 holddown, 3 hidden) Restart Complete inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden) Restart Complete private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
경로 비활성 경로 세부 정보 표시
user@host> show route inactive-path detail inet.0: 25 destinations, 26 routes (24 active, 0 holddown, 1 hidden) Restart Complete 10.12.100.12/30 (2 entries, 1 announced) OSPF Preference: 10 Next-hop reference count: 1 Next hop: via so-0/3/0.0, selected State: <Int> Inactive reason: Route Preference Local AS: 1 Age: 3:58:24 Metric: 1 Area: 0.0.0.0 Task: OSPF AS path: I private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden) 10.0.0.0/8 (2 entries, 0 announced) Direct Preference: 0 Next hop type: Interface Next-hop reference count: 1 Next hop: via fxp1.0, selected State: <NotBest Int> Inactive reason: No difference Age: 4:40:52 Task: IF AS path: I red.inet.0: 6 destinations, 8 routes (4 active, 0 holddown, 3 hidden) Restart Complete 10.12.80.0/30 (2 entries, 1 announced) BGP Preference: 170/-101 Next-hop reference count: 6 Source: 10.12.80.1 Next hop: 10.12.80.1 via ge-6/3/2.0, selected State: <Ext> Inactive reason: Route Preference Peer AS: 100 Age: 4:39:13 Task: BGP_100.10.12.80.1+179 AS path: 100 I Localpref: 100 Router ID: 10.0.0.0
show route inactive-path extensive
명령의 show route inactive-path extensive
출력은 명령의 show route inactive-path detail
출력과 동일합니다.
show route inactive-path terse
user@host> show route inactive-path terse inet.0: 25 destinations, 26 routes (24 active, 0 holddown, 1 hidden) Restart Complete + = Active Route, - = Last Active, * = Both A Destination P Prf Metric 1 Metric 2 Next hop AS path 10.12.100.12/30 O 10 1 >so-0/3/0.0 private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both A Destination P Prf Metric 1 Metric 2 Next hop AS path 10.0.0.0/8 D 0 >fxp1.0 red.inet.0: 6 destinations, 8 routes (4 active, 0 holddown, 3 hidden) Restart Complete + = Active Route, - = Last Active, * = Both A Destination P Prf Metric 1 Metric 2 Next hop AS path 10.12.80.0/30 B 170 100 >10.12.80.1 100 I iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden) Restart Complete mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden) Restart Complete bgp.l3vpn.0: 3 destinations, 3 routes (0 active, 0 holddown, 3 hidden) Restart Complete inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden) Restart Complete private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
릴리스 정보
Junos OS 릴리스 7.4 전에 소개된 명령입니다.