Configuring ATM-over-ADSL Interfaces

Services Routers with ADSL Annex A or Annex B PIMs can use an Asynchronous Transfer Mode (ATM) interface to send network traffic through a point-to-point connection to a DSL access multiplexer (DSLAM). ADSL is currently not supported on the J2300 Services Router.

Note: You can configure Services Routers with ADSL PIMs for connections through ADSL only, not for direct ATM connections.

To configure Point-to-Point Protocol (PPP), see the JUNOS Network Interfaces Configuration Guide.

You configure the underlying ADSL interface as an ATM interface, with an interface name of at-pim/0/port. (For information about interface names, see Network Interface Naming.) Multiple encapsulation types are supported on both the physical and logical ATM-over-ADSL interface.

This section contains the following topics:

• Configuring an ATM-over-ADSL Interface with Quick Configuration
• Adding an ATM-over-ADSL Network Interface with a Configuration Editor