Scheduling and Canceling a Commit

To schedule a candidate configuration for a commit operation at a future time or the next time the Services Router is rebooted, use the commit at command:

Replace string with reboot or the time at which the configuration is to be committed, in one of the following formats:

• hh:mm<:ss>—Hours, minutes, and seconds (optional), in 24-hour format. For example, 20:30 is 8:30 PM.
• yyyy-mm-dd hh:mm<:ss>—Year, month, date, hours, minutes, and seconds (optional), in 24-hour format. For example, 2004-09-05 08:00 is September 5, 2004 at 8:00 AM.

The Services Router checks the configuration. If the result of the check is successful, the current user is logged out of configuration mode, and the configuration data is left in a read-only state. No other commit operation can be performed until the scheduled one is completed. If the configuration contains syntax errors, a message indicates the location of the error.

To cancel a pending commit operation, use the clear system commit operational mode command. For more information, see the JUNOS System Basics and Services Command Reference.