CLI Configuration

1. Configure interfaces.

   user@host# set interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24

   user@host# set interfaces ge-0/0/2 unit 0 family inet address 1.1.1.1/24

   user@host# set security zones security-zone private interface ge-0/0/0.0

2. Configure addresses.

   user@host# set security zones security-zone private address-book address phone1 10.1.1.3/32

   user@host# set security zones security-zone public address-book address proxy 10.1.1.3/32

   user@host# set security zones security-zone public address-book address phone2 1.1.1.4/32

3. Configure zones.

   user@host# set security zones security-zone private

   user@host# set security zones security-zone public

   user@host# set security zones security-zone private interfaces ge-0/0/0.0

   user@host# set security zones security-zone public interfaces ge-0/0/2.0

4. Configure static NAT.

   user@host# set security nat interface ge-0/0/2.0 static-nat 1.1.1.3/32 host 10.1.1.3/32

5. Configure Policies.

   user@host# set security policies from-zone public to-zone private policy incoming match source-address any destination-address static_nat_1.1.1.3-32 application junos-jsrp

   user@host# set security policies from-zone public to-zone private policy incoming then permit