Accessing the WXOS CLI

Use any of the following methods to access the WXOS CLI:

• From the JUNOS CLI, enter the following command, where slot is the higher number of the two slots occupied by the WXC ISM 200:

  user@host> request wan-acceleration login fpc slot

  Copyright 2001-2007 Juniper Networks, Inc. All Rights Reserved.

  WXC-10.1.1.2#

  To view the slot number, enter the show chassis fpc pic-status command. Note that users require interface permission for read-only access, and interface-control and configure permission for read-write access.

• From the WXOS Web interface, select Admin>Tools>Command Line Interface. Some CLI commands cannot be entered from the Web interface (refer to the WX/WXC Operator's Guide).