Resolved Issues

The following issues have been resolved since Release 9.2R3 of JUNOS software with enhanced services. The identifier following the description is the tracking number in our bug database.

ALG

• On J6350 Services Routers handling more than 1000 simultaneous MGCP calls, the success rate for all MGCP ALG calls was approximately 95 percent. [PR/254297: This issue has been resolved.]
• JUNOS software with enhanced services did not have an option for setting default values for Sun RPC and Microsoft RPC applications. [PR/256971: This issue has been resolved.]

Chassis Cluster

• In a chassis cluster, Layer 2 switching did not work for 4-Port Fast Ethernet ePIMs, 8-Port Gigabit Ethernet uPIMS, and 16-Port Gigabit Ethernet uPIMs. [PR/266857: This issue has been resolved.]
• A chassis cluster using Web authentication might display an “invalid username-password” message even though the user was successfully authenticated locally or through authentication servers. [PR/274077: This issue has been resolved.]

Class of Service

• In J2350 Services Routers, CoS did not work when the data sent to the egress ge interface was more than 100 MB. [PR/281367: This issue has been resolved.]

Enhanced switching

• In the case of traffic going through one of the ports of a LAG running LACP, any change in remote port (for example, port going down) did not change the distribution of traffic at the local switch. [PR/292136: This issue has been resolved.]
• Ping failed when the encapsulation was changed on an existing ISDN call. [PR/303759: This issue has been resolved.]

Interface and Chassis

• If the MTU was set to more than 6 KB for a built-in Gigabit Ethernet port or a 1-port Gigabit Ethernet ePIM, packets might be discarded with an FCS error. [PR/82245: This issue has been resolved.]
• If one routing instance type was changed from vrf to virtual router and then changed back to vrf, the mt interface might fail to come up again. [PR/307401: This issue has been resolved.]