[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

clear security firewall-authentication users address

Syntax



clear security firewall-authentication
users address            address                

<node (           node-id          | all | local
| primary)>

Release Information

Command introduced in Release 8.5 of JUNOS software; node options added in Release 9.0 of JUNOS software.

Description

Clear information about the users at the specified IP address that are currently authenticated.

This command is supported on J-series and SRX-series devices.

Options

address address —IP address for which to clear user firewall authentication information.

none—Clear all the firewall authentication information for users at this IP address.

node—(Optional) For chassis cluster configurations, clear user firewall authentication entries on a specific node.

node-id —Identification number of the node. It can be 0 or 1.
all —Clear all nodes.
local —Clear the local node.
primary—Clear the primary node.

Required Privilege Level

clear

List of Sample Output

clear security firewall-authentication users address 100.0.0.1
clear security firewall-authentication users address 100.0.0.1 node 1

Output Fields

When you enter this command, you are provided feedback on the status of your request.

clear security firewall-authentication users address 100.0.0.1

user@host> clear
security firewall-authentication users address 100.0.0.1

node0:
--------------------------------------------------------------------------
node1:
--------------------------------------------------------------------------

clear security firewall-authentication users address 100.0.0.1 node 1

user@host> clear
security firewall-authentication users address 100.0.0.1 node 1

node1:
--------------------------------------------------------------------------