[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

clear security flow session source-prefix

Syntax



clear security flow session
source-prefix
         
           source-prefix-number                

<node (           node-id          | all | local
| primary)>

Release Information

Command introduced in Release 8.5 of JUNOS software; node options added in Release 9.0 of JUNOS software.

Description

Clear sessions that match the source prefix.

This command is supported on J-series and SRX-series devices.

Options

source-prefix-number —Source IPv4 prefix or address.

node—(Optional) For chassis cluster configurations, clear security sessions matching the source prefix on a specific node (device) in the cluster.

node-id —Identification number of the node. It can be 0 or 1.
all —Clear all nodes.
local —Clear the local node.
primary—Clear the primary node.

Required Privilege Level

clear

List of Sample Output

clear security flow session source-prefix 100.0.0.1
clear security flow session source-prefix 100.0.0.1 node 0

Output Fields

When you enter this command, you are provided feedback on the status of your request.

clear security flow session source-prefix 100.0.0.1

user@host> clear
security flow session source-prefix 100.0.0.1

node0:
--------------------------------------------------------------------------
0 active sessions cleared
node1:
--------------------------------------------------------------------------
0 active sessions cleared

clear security flow session source-prefix 100.0.0.1 node 0

user@host> clear
security flow session source-prefix 100.0.0.1 node 0

node0:
--------------------------------------------------------------------------
0 active sessions cleared