Displaying CoS Tunnel Configurations
Purpose
Verify the configuration of the CoS tunnel queuing on a Services Router. You can analyze the flow of traffic by displaying the entire configuration. The following output is specific to CoS queuing configuration.
Action
From the CLI on Router A and B, enter the following show commands.
Router B
user@host# show interfaces gr-0/0/0per-unit-schedulerunit 0 {tunnelsource 70.0.0.1;destination 70.0.0.2;family inet {address 10.80.0.1/24;}}}
user@host#show class-of-service interfaces
gr-0/0/0unit 0 {scheduler-map SMAP;shaping-rate 200m;}
Router A
user@host# show chassisfpc 0 {pic 0 {tunnel-queuing}}[edit]