Verifying a CoS IP-IP Tunnel Configuration

Purpose

Verify that the Services Router is configured properly for tunnel configuration.

Action

From the CLI, enter the show interfaces queue ip-0/0/0.0 command.

Note: If you enter ip-0/0/0 only, queue information for all tunnels is displayed. If you enter ip-0/0/0 unit logical_unit_number queue information for the specific tunnel is displayed.

Sample Output

Logical interface ip-0/0/0.0 (Index 70) (SNMP ifIndex 56
Forwarding classes: 8 supported, 4 in use
Egress queues: 8 supported, 4 in use
Burst size: 0
Queue: 0, Forwarding classes: q0
Queued:
  Packets: 38802710 22687 pps
  Bytes: 10942364220 51183344 bps

Meaning

The output lists the egress queues and the corresponding forwarding classes. Assuming that traffic is correctly classified using appropriate classifiers on the ingress port, verify the traffic flow in various queues.

Related Topics

For a complete description of the show interfaces queue command and output, see the JUNOS Interfaces Command Reference.