Displaying a PPPoE Configuration for an ATM-over-ADSL or ATM-over-SHDSL Interface
Purpose
Verify the PPPoE configuration for an ATM-over-ADSL or ATM-over-SHDSL interface.
Action
From the J-Web interface, select Configure>CLI Tools>CLI Viewer. Alternatively, from configuration mode in the CLI, enter the show interfaces command from the top level.
[edit]user@host#show interfacesat-6/0/0 {encapsulation ethernet-over-atm;atm-options {vpi 0;}dsl-options {operating-mode itu-dmt;}unit 0 {encapsulation ppp-over-ether-over-atm-llc;vci 35;}}pp0 {unit 0 {pppoe-options {underlying-interface at-6/0/0.0;idle-timeout 123;access-concentrator myac;service-name myserv;auto-reconnect 10;client;}family inet {address 11.1.1.1/32 {destination 11.1.1.2;}}family inet6 {address 2004::1/128 {destination 2004::2;}}family mpls;}}
Meaning
Verify that the output shows the intended configuration of PPPoE.
Related Topics
For more information about the format of a configuration file, see the J-Web Interface User Guide or the JUNOS CLI User Guide.