Example: Allowing Unknown SCCP ALG Message Types (J-Web)

In this example, you configure the device to allow unknown SCCP message types in both NAT mode and route mode.

To allow unknown message types:

1. Select Configure>Security>ALG.
2. Select the SCCP tab.
3. Select the Enable Permit NAT applied check box.
4. Select the Enable Permit routed check box.
5. Click OK to save and commit the configuration.

Related Topics

• JUNOS Software Feature Support Reference for SRX Series and J Series Devices
• Understanding SCCP ALG Unknown Message Types
• SCCP ALG Configuration Overview
• Example: Allowing Unknown SCCP ALG Message Types (CLI)
• Verifying SCCP ALG Configurations