Example: Configuring an Active/Passive Chassis Cluster Pair (J-Web)

1. Enabling clustering

   See Step 1 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).

2. Management interface

   See Step 2 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).

3. Fabric interface

   See Step 3 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).

4. Redundancy groups
   • Select Configure>System Properties>Chassis Cluster.
   • Enter the following, then click Apply:
     • Redundant ether-Interface Count: 2
     • Heartbeat Interval: 1000
     • Heartbeat Threshold: 3
     • Nodes: 0
     • Group Number: 0
     • Priorities: 100
   • Enter the following, then click Apply:
     • Nodes: 0
     • Group Number: 1
     • Priorities: 1
   • Enter the following, then click Apply:
     • Nodes: 1
     • Group Number: 0
     • Priorities: 100
   • Enter the following, then click Apply:
     • Nodes: 1
     • Group Number: 1
     • Priorities: 1
     • Interface Monitor—Interface: fe-1/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: fe-5/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: ge-0/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: ge-4/0/0
     • Interface Monitor—Weight: 255
5. Redundant Ethernet interfaces
   • Select Configure>System Properties>Chassis Cluster.
   • Select ge-0/0/0.
   • Enter the following:
     • Redundant Parent: reth1
   • Click Apply.
   • Select ge-4/0/0.
   • Enter the following:
     • Redundant Parent: reth1
   • Click Apply.
   • Select fe-1/0/0.
   • Enter the following:
     • Redundant Parent: reth0
   • Click Apply.
   • Select fe-5/0/0.
   • Enter the following:
     • Redundant Parent: reth0
   • Click Apply.
   • For last four configuration settings of Step 5, see Step 5 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).
6. Security zones
   • See Step 6 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).
7. Security policies
   • See Step 7 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).

Related Topics

• JUNOS Software Feature Support Reference for SRX Series and J Series Devices
• Understanding Active/Passive Chassis Cluster Deployment
• Example: Configuring an Active/Passive Chassis Cluster Pair (CLI)
• Understanding What Happens When Chassis Cluster Is Enabled
• Understanding Chassis Cluster Formation