- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- Site Preparation Checklist for ACX5448, ACX5448-D, and ACX5448-M Routers
- ACX5448, ACX5448-D, and ACX5448-M Site Guidelines and Requirements
- ACX5448, ACX5448-D, and ACX5448-M Network Cable and Transceiver Planning
- ACX5448, ACX5448-D, and ACX5448-M Management and Console Port Specifications and Pinouts
- play_arrow Initial Installation and Configuration
- ACX5448, ACX5448-D, and ACX5448-M Installation Overview
- Unpacking and Mounting ACX5448, ACX5448-D, and ACX5448-M
- Connect ACX5448, ACX5448-D, and ACX5448-M to Power
- Connect ACX5448, ACX5448-D, and ACX5448-M to External Devices
- Register Products—Mandatory to Validate SLAs
- Perform Initial Software Configuration for the ACX5448, ACX5448-D, and ACX5448-M Routers
- play_arrow Maintaining Components
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
Compliance Statements for Data Center
The equipment is suitable for installation as part of the Common Bonding Network (CBN).
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (that is, DC-I), as defined in GR-1089-CORE.
You must provision a readily accessible device outside of the equipment to disconnect power. The device must also be rated based on local electrical code practice.