- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- Site Preparation Checklist for ACX5448, ACX5448-D, and ACX5448-M Routers
- ACX5448, ACX5448-D, and ACX5448-M Site Guidelines and Requirements
- ACX5448, ACX5448-D, and ACX5448-M Network Cable and Transceiver Planning
- ACX5448, ACX5448-D, and ACX5448-M Management and Console Port Specifications and Pinouts
- play_arrow Initial Installation and Configuration
- ACX5448, ACX5448-D, and ACX5448-M Installation Overview
- Unpacking and Mounting ACX5448, ACX5448-D, and ACX5448-M
- Connect ACX5448, ACX5448-D, and ACX5448-M to Power
- Connect ACX5448, ACX5448-D, and ACX5448-M to External Devices
- Register Products—Mandatory to Validate SLAs
- Perform Initial Software Configuration for the ACX5448, ACX5448-D, and ACX5448-M Routers
- play_arrow Maintaining Components
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
Ramp Warning
When installing the device, do not use a ramp inclined at more than 10 degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10 graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus ylittää 10 astetta.
Avertissement Ne pas utiliser une rampe dont l'inclinaison est supérieure à 10 degrés.
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados.
Varning! Använd inte ramp med en lutning på mer än 10 grader.