ON THIS PAGE
Configuration Statements
SUMMARY This topic describes the various configuration statements required to enable the T-GM functionality on ACX7024 and ACX7024X routers.
clock-mode
Syntax
clock-mode (ordinary);
Hierarchy Level
[edit protocols ptp]
Description
Configure the clock mode as ordinary clock with GNSS configuration. The clock mode determines whether the node behaves as a client or primary node. This attribute is mandatory and has no default value.
Options
ordinary—The clock mode of the node is a system clock that
acts either as a primary node or as a client node.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
profile-type
Syntax
profile-type (g.8275.1);
Hierarchy Level
[edit protocols ptp]
Description
On ACX7024 and ACX7024X routers, configure the G.8275.1 profile for GNSS receiver that requires accurate phase and time synchronization. This profile supports the architecture defined in ITU-T G.8271.1 specification to enable the distribution of phase and time with full timing support. This profile requires all devices in the network to operate in combined or hybrid modes. To fulfill this requirement, you must enable Precision Time Protocol (PTP) and Synchronous Ethernet on all devices.
Options
g.8275.1—Enable the G.8275.1 PTP profile.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.