- play_arrow Overview
- play_arrow CTP151 Platform Overview
- play_arrow CTP151 Interface Modules
-
- play_arrow Safety
- play_arrow General Safety Guidelines and Warnings
- play_arrow Module Installation Safety Guidelines and Warnings
- play_arrow Hardware Compliance and Homologation
-
- play_arrow Installation
- play_arrow Unpacking and Mounting the CTP151 Device
- play_arrow Installing Modules
- play_arrow Cabling
-
- play_arrow Configuration
- play_arrow Accessing the CTP151 Platform
- play_arrow Powering On and Initially Configuring the CTP151 Device
-
- play_arrow Maintenance
- play_arrow Maintaining Components
- play_arrow Product Reclamation and Recycling
- play_arrow Contacting Customer Support and Returning the Chassis or Components
-
- play_arrow Troubleshooting
- play_arrow Troubleshooting Hardware and Power Failures
-
Management Port Connector Pinout Information for the CTP151 Device
The 1000BASE-T RJ-45 management port on the CTP151 device uses an RJ-45 connector to connect to a management device for out-of-band management.
Table 1 provides the pinout information of the RJ-45 management port connector.
Pin | Signal | Description |
---|---|---|
1 | TRP1+ | Transmit/receive data pair 1 |
2 | TRP1– | Transmit/receive data pair 1 |
3 | TRP2+ | Transmit/receive data pair 2 |
4 | TRP3+ | Transmit/receive data pair 3 |
5 | TRP3– | Transmit/receive data pair 3 |
6 | TRP2– | Transmit/receive data pair 2 |
7 | TRP4+ | Transmit/receive data pair 4 |
8 | TRP4– | Transmit/receive data pair 4 |