close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow CTP151 Platform Overview
- play_arrow CTP151 Interface Modules
-
- play_arrow Safety
- play_arrow General Safety Guidelines and Warnings
- play_arrow Module Installation Safety Guidelines and Warnings
- play_arrow Hardware Compliance and Homologation
-
- play_arrow Installation
- play_arrow Unpacking and Mounting the CTP151 Device
- play_arrow Installing Modules
- play_arrow Cabling
-
- play_arrow Configuration
- play_arrow Accessing the CTP151 Platform
- play_arrow Powering On and Initially Configuring the CTP151 Device
-
- play_arrow Maintenance
- play_arrow Maintaining Components
- play_arrow Product Reclamation and Recycling
- play_arrow Contacting Customer Support and Returning the Chassis or Components
-
- play_arrow Troubleshooting
- play_arrow Troubleshooting Hardware and Power Failures
-
list Table of Contents
RJ-45 to DB-9 Serial Port Adapter Pinout Information for a CTP151 Device
date_range
16-May-23
The console port is an RS-232 serial interface that uses an RJ-45 connector to connect to a management device such as a PC or a laptop. If your PC or laptop has a DB-9 plug connector pin, you can use a combination of the RJ-45 cable and RJ-45 to DB-9 adapter (p/n 720-014126) supplied with the device to connect your PC to the CTP151 device.
If your laptop or PC does not have a DB-9 plug connector pin, you must use the Mini-USB console port on the front panel of the CTP151 to connect your laptop or PC directly to the CTP151 device.
Table 1 provides the pinout information for the RJ-45 to DB-9 serial port adapter.
RJ-45 Pin | Signal | DB-9 Pin | Signal |
|---|---|---|---|
1 | RTS | 8 | CTS |
2 | DTR | 6 | DSR |
3 | TXD | 2 | RXD |
4 | GND | 5 | GND |
6 | RXD | 3 | TXD |
7 | DSR | 4 | DTR |
8 | CTS | 7 | RTS |
