Unpacking the CTP Device
Depending on the device, it may be delivered boxed, bolted, and strapped to a skid. For your convenience, we recommend that you unpack the device in the location where you want to install it.
Warning:
For the larger CTP series devices, three people are required to install the device in a rack: two to lift the device into position and one to screw it to the rack.
To unpack the device:
- Cut the two straps that secure the carton to the skid, open the carton from the top, and remove the box of accessories that sits on top of the device.
- Unlock the four plastic clips that hold the box to the skid by squeezing them in their center and pulling out, and then lift the carton off the device.
- Remove the three screws that attach each of the two L-brackets to the device.
- To avoid scratching the device when removing it from the skid, detach one of the L-brackets from the skid by removing the three screws.