- play_arrow Overview
- play_arrow Appliance Overview
- play_arrow Chassis
-
- play_arrow Site Planning and Specifications
- play_arrow Site Preparation
- play_arrow Rack Requirements
- play_arrow Power Requirements
- play_arrow Compliance
-
- play_arrow Installation and Configuration
- play_arrow Installing the Appliance
- Tools and Parts Required to Install the Junos Space Appliance
- Unpacking the JA2500 Junos Space Appliance
- Mounting the JA2500 Junos Space Appliance
- Front-and-Rear Mounting the JA2500 Junos Space Appliance Flush to a Rack
- Front-and-Rear Mounting the JA2500 Junos Space Appliance Recessed in a Rack
- Midmounting the Junos Space Appliance in a Two-Post Rack
- play_arrow Connecting the Appliance
- play_arrow Performing Initial Configuration
- Booting the Junos Space Appliance
- Configuring a Junos Space Appliance as a Junos Space Node
- Configuring a Junos Space Appliance as a Standalone or Primary FMPM Node
- Configuring a Junos Space Appliance as a Backup or Secondary FMPM Node for High Availability
- Installing a Junos Space Image on a Junos Space Appliance by Using a USB Drive
- Powering Off the Junos Space Appliance
- play_arrow Changing Network and System Settings
-
- play_arrow Maintenance and Replacing Components
- play_arrow Replacing Components
- Installing and Removing JA2500 Junos Space Appliance Hardware Components
- Replacing the AC Power Supply Cord on a Junos Space Appliance
- Replacing the AC Power Supply Module on a Junos Space Appliance
- Replacing the DC Power Supply Cable on a Junos Space Appliance
- Replacing the DC Power Supply Module on a Junos Space Appliance
- Replacing the Fan on a Junos Space Appliance
- Replacing the Hard Disk on a JA2500 Junos Space Appliance
- play_arrow Maintenance
-
- play_arrow Troubleshooting
- play_arrow Troubleshooting Procedures
- play_arrow Monitoring the Appliance
- play_arrow Returning Hardware
- Returning a JA2500 Junos Space Appliance or Component for Repair or Replacement
- Locating the Serial Number on a JA2500 Junos Space Appliance or Component
- Contacting Customer Support to Obtain Return Materials Authorization for Junos Space Appliances
- Packing a JA2500 Junos Space Appliance or Component for Shipping
-
AC Power Electrical Safety Guidelines
For devices with AC power supplies, an external surge protective device (SPD) must be used at the AC power source.
The following electrical safety guidelines apply to AC-powered devices:
Note the following warnings printed on the device:
“CAUTION: THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD. DISCONNECT ALL POWER SUPPLY CORDS BEFORE SERVICING TO AVOID ELECTRIC SHOCK.”
“ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE PRÉVENIR LES CHOCS ÉLECTRIQUES, DÉBRANCHER TOUT CORDON D'ALIMENTATION AVANT DE FAIRE LE DÉPANNAGE.”
AC-powered devices are shipped with a three-wire electrical cord with a grounding-type plug that fits only a grounding-type power outlet. Do not circumvent this safety feature. Equipment grounding must comply with local and national electrical codes.
You must provide an external certified circuit breaker rated minimum 20 A in the building installation.
The power cord serves as the main disconnecting device for the AC-powered device. The socket outlet must be near the AC-powered device and be easily accessible.
For devices that have more than one power supply connection, you must ensure that all power connections are fully disconnected so that power to the device is completely removed to avoid electric shock. To disconnect power, unplug all power cords (one for each power supply module).
Power Cable Warning (Japanese) |
|---|
Warning: The attached power cable is only for this product. Do not use the cable for another product.  |
