- play_arrow Overview
- play_arrow Appliance Overview
- play_arrow Chassis
-
- play_arrow Safety and Regulatory Compliance Information
- play_arrow General Safety Information
- play_arrow Radiation and Laser Warnings
- play_arrow Installation and Maintenance Safety Information
- play_arrow Power and Electrical Safety Information
- General Electrical Safety Guidelines and Warnings
- Preventing Electrostatic Discharge Damage
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- DC Power Electrical Safety Guidelines
- DC Power Disconnection Warning
- DC Power Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Multiple Power Supplies Disconnection Warning
- TN Power Warning
- Action to Take After an Electrical Accident
-
- play_arrow Installation and Configuration
- play_arrow Installing the Appliance
- Tools and Parts Required to Install the Junos Space Appliance
- Unpacking the JA2500 Junos Space Appliance
- Mounting the JA2500 Junos Space Appliance
- Front-and-Rear Mounting the JA2500 Junos Space Appliance Flush to a Rack
- Front-and-Rear Mounting the JA2500 Junos Space Appliance Recessed in a Rack
- Midmounting the Junos Space Appliance in a Two-Post Rack
- play_arrow Connecting the Appliance
- play_arrow Performing Initial Configuration
- Booting the Junos Space Appliance
- Configuring a Junos Space Appliance as a Junos Space Node
- Configuring a Junos Space Appliance as a Standalone or Primary FMPM Node
- Configuring a Junos Space Appliance as a Backup or Secondary FMPM Node for High Availability
- Installing a Junos Space Image on a Junos Space Appliance by Using a USB Drive
- Powering Off the Junos Space Appliance
- play_arrow Changing Network and System Settings
-
- play_arrow Maintenance and Replacing Components
- play_arrow Replacing Components
- Installing and Removing JA2500 Junos Space Appliance Hardware Components
- Replacing the AC Power Supply Cord on a Junos Space Appliance
- Replacing the AC Power Supply Module on a Junos Space Appliance
- Replacing the DC Power Supply Cable on a Junos Space Appliance
- Replacing the DC Power Supply Module on a Junos Space Appliance
- Replacing the Fan on a Junos Space Appliance
- Replacing the Hard Disk on a JA2500 Junos Space Appliance
- play_arrow Maintenance
-
- play_arrow Troubleshooting
- play_arrow Troubleshooting Procedures
- play_arrow Monitoring the Appliance
- play_arrow Returning Hardware
- Returning a JA2500 Junos Space Appliance or Component for Repair or Replacement
- Locating the Serial Number on a JA2500 Junos Space Appliance or Component
- Contacting Customer Support to Obtain Return Materials Authorization for Junos Space Appliances
- Packing a JA2500 Junos Space Appliance or Component for Shipping
-
Compliance Statements for EMC Requirements for JA2500
This topic describes the electromagnetic compatibility (EMC) requirements for the Junos Space JA2500 appliance:
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. Industry Canada does not guarantee the equipment will operate to the users’ satisfaction.
Before installing this equipment, users should ensure that it is permissible to connect the equipment to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the inside wiring associated with a single line individual service can be extended by means of a certified connector assembly. The customer should be aware that compliance with the above conditions might not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, might give the telecommunications company cause to request the user to disconnect the equipment.
Users should not attempt to make electrical ground connections by themselves, but should contact the appropriate inspection authority or an electrician, as appropriate.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution might be particularly important in rural areas.
European Community
This is a Class A device. In a domestic environment this device might cause radio interference, in which case the user needs to take adequate measures.
Japan
The preceding translates as follows:
This is a Class A device. In a domestic environment this device might cause radio interference, in which case the user needs to take adequate measures.
VCCI-A
Korea
The preceding translates as follows:
This equipment is Industrial (Class A) electromagnetic wave suitability equipment and the seller or user should take notice of it, and this equipment is to be used in places other than the home
United States
The device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users need to correct the interference at their own expense.
FCC Part 15 Statement
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, might cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio or TV technician for help.