Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

close

keyboard_arrow_left

Table of Contents Expand all

play_arrow Overview
- play_arrow Interface Module Overview
  - MX Series Interface Module Overview
- play_arrow DPCs Supported on MX Series Routers
  - MX Series DPC Overview
  - DPCs Supported on MX240, MX480, and MX960 Routers
- play_arrow SPC Supported on MX Series Routers
  - MX-SPC3 Services Card Overview and Support on MX240, MX480, and MX960 Routers
- play_arrow MPCs Supported on MX Series Routers
  - MX Series MPC Overview
  - MPCs Supported by MX Series Routers
- play_arrow MICs Supported on MX Series Routers
- play_arrow FPCs and PICs Supported on MX Series Routers
- play_arrow Network Interface Specifications
  - Determining Transceiver Support and Specifications
  - Cable and Connector Specifications for MX and PTX Series Devices
play_arrow DPC, SPC, MPC, MIC, and PIC Descriptions
play_arrow Protocol and Application Support

list Table of Contents

English

keyboard_arrow_right

MPC2E NG

date_range 13-Jan-21

arrow_backward

arrow_forward

Software release	Junos OS releases 14.1R4, 14.2R3 and Junos Continuity, Junos OS release 15.1 and later. Refer to MIC/MPC Compatibility for information about which MICs are supported on this MPC. Refer to the JTAC Knowledgebase article https://kb.juniper.net/KB21476 for recommended software releases.
Description	80 Gbps capacity without hierarchical quality of service (HQoS) Requires high-capacity fan trays and high-capacity filter trays Weight: 15.96 lb (7.26 kg) Model numbers: MPC2E-3D-NG Name in the CLI: `MPC2E NG PQ & Flex Q` Add-on license provides limited additional flexible queuing. Note: MPC2E-3D-NG is not compatible with SCB, you must use either SCBE-MX or SCBE2-MX for the switch fabric interface.
Hardware features	Line-rate throughput of up to 80 Gbps Supports WAN-PHY mode at 9.95 Gbps and LAN-PHY mode at 10.31 Gbps Two slots for MICs Junos Trio chipsets for increased scaling for bandwidth, subscribers, and services. Note: MPC2E-3D-NG is not compatible with SCB, you must use either SCBE-MX or SCBE2-MX for the switch fabric interface. Note: MPC2E-3D-NG does not support MIC3-3D-10XGE-SFPP, MIC3-3D-1X100GE-CFP, MIC3-3D-1X100GE-CXP, and MIC3-3D-2X40GE-QSFPP. Note: The non-HQOS MPC3E NG and MPC2E NG MPCs support MIC-3D-8CHOC3-4CHOC12 and MIC-3D-4CHOC3-2CHOC12 only with a limited queuing license.
Software features	Chained composite next hops Layer 3 VPN localization Detection of Layer 2 loops Entropy label support in mixed mode SNMP and CLI support for Routing Engine memory monitoring Mixed-mode LAG support on core interfaces Dynamic power management for MICs Support for flexible-queuing See Protocols and Applications Supported by the MX240, MX480, MX960, MX2010, and MX2020 MPC2E for information about the protocols and applications that this MPC supports.
Power requirement	Maximum with highest-power MICs at 55° C: 9.88 A @ 48 V (474 W) At different temperatures: 55° C: 474 W 40° C: 417 W 25° C: 400 W
LEDs	OK/FAIL LED, one bicolor: Steady green—MPC is functioning normally. Blinking green—MPC is transitioning online or offline. Red—MPC has failed.

arrow_backward PREVIOUS MPC2E P

NEXT arrow_forward MPC2E NG Q

footer-navigation