- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- MX10004 Installation Overview
- Unpack the MX10004 Router
- Mount the Juniper Networks MX10004 Router Using the JNP10004-RMK-4POST Rack-Mount Kit
- Mount the Juniper Networks MX10004 Router Using the JNP10K-RMK-4PST-XT Rack-Mount Kit
- Install the Front Door on an MX10004 Router
- Connect the MX10004 to Power
- Connect the MX10004 Router to External Devices
- Register Products—Mandatory to Validate SLAs
- Perform the Initial Configuration for the MX10004 Router
- play_arrow Maintaining Components
- play_arrow Troubleshooting the MX10004 Router
- play_arrow Contacting Customer Support and Returning the Chassis or Components
Chassis and Component Lifting Guidelines
Before moving the device to a site, ensure that the site meets the power, environmental, and clearance requirements.
Before lifting or moving the device, disconnect all external cables and wires.
As when lifting any heavy object, ensure that your legs bear most of the weight rather than your back. Keep your knees bent and your back relatively straight. Do not twist your body as you lift. Balance the load evenly and be sure that your footing is firm.
Use the following lifting guidelines to lift devices and components:
Up to 39.7 lb (18 kg): One person.
From 39.7 lb (18 kg) to 70.5 lb (32 kg): Two or more people.
From 70.5 lb (32 kg) to 121.2 lb (55 kg): Three or more people.
Above 121.2 lb (55 kg): Use material handling systems (such as levers, slings, lifts, and so on). When this is not practical, engage specially trained persons or systems (such as riggers or movers).
