- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- MX10004 Installation Overview
- Unpack the MX10004 Router
- Mount the Juniper Networks MX10004 Router Using the JNP10004-RMK-4POST Rack-Mount Kit
- Mount the Juniper Networks MX10004 Router Using the JNP10K-RMK-4PST-XT Rack-Mount Kit
- Install the Front Door on an MX10004 Router
- Connect the MX10004 to Power
- Connect the MX10004 Router to External Devices
- Register Products—Mandatory to Validate SLAs
- Perform the Initial Configuration for the MX10004 Router
- play_arrow Maintaining Components
- play_arrow Troubleshooting the MX10004 Router
- play_arrow Contacting Customer Support and Returning the Chassis or Components
Agency Approvals for MX10004 Routers
The MX10004 routers comply with the following standards:
Safety
CAN/CSA C22.2 No. 62368-1-14 and 60950-1
UL 62368-1 and 60950-1
IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report
IEC 62368-3 for USB and PoE: CB Scheme report
CFR, Title 21, Chapter 1, Subchapter J, Part 1040
REDR c 1370 OR CAN/CSA-E 60825-1- Part 1
IEC 60825-1
IEC 60825-2
EMC
FCC 47 CFR Part 15
ICES-003 / ICES-GEN
EN 300 386 V1.6.1
EN 300 386 V2.1.1
EN 55032
CISPR 32
EN 55024
CISPR 24
EN 55035
CISPR 35
IEC/EN 61000 Series
AS/NZS CISPR 32
VCCI-CISPR 32
BSMI CNS 13438
KN32 and KN35
KN 61000 Series
TEC/SD/DD/EMC-221/05/OCT-16
TCVN 7189
TCVN 7317