- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- MX10008 Installation Overview
- Unpacking the MX10008 Router and Components
- Installing the Mounting Hardware
- Installing the MX10008 into a Rack
- Mount the Juniper Networks MX10008 Router Using the JNP10004-RMK-4POST Rack-Mount Kit
- Mount the Juniper Networks MX10008 Router Using the JNP10K-RMK-4PST-XT Rack-Mount Kit
- Installing the Front Door on an MX10008
- Connecting the MX10008 to Power
- Connecting the MX10008 to External Devices
- Register Products—Mandatory to Validate SLAs
- Configuring an MX10008 Router
- play_arrow Maintaining Components
- Field-Replaceable Units in an MX10008
- Removing and Installing Routing and Control Boards
- Removing and Installing MX10008 Cooling System Components
- Removing and Installing MX10000 Power System Components
- Removing and Installing MX10008 Switch Fabric Boards
- Removing and Installing MX10008 MPC Components
- Removing and Installing Transceivers and Fiber-Optic Cables
- Removing the MX10008 Router
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
AC Power Electrical Safety Guidelines
The following electrical safety guidelines apply to AC-powered devices:
Note the following warnings printed on the device:
“CAUTION: THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD. DISCONNECT ALL POWER SUPPLY CORDS BEFORE SERVICING TO AVOID ELECTRIC SHOCK.”
“ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE PRÉVENIR LES CHOCS ÉLECTRIQUES, DÉBRANCHER TOUT CORDON D'ALIMENTATION AVANT DE FAIRE LE DÉPANNAGE.”
AC-powered devices are shipped with a three-wire electrical cord with a grounding-type plug that fits only a grounding-type power outlet. Do not circumvent this safety feature. Equipment grounding must comply with local and national electrical codes.
You must provide an external certified circuit breaker (2-pole circuit breaker or 4-pole circuit breaker based on your device) rated minimum 20 A in the building installation.
The power cord serves as the main disconnecting device for the AC-powered device. The socket outlet must be near the AC-powered device and be easily accessible.
For devices that have more than one power supply connection, you must ensure that all power connections are fully disconnected so that power to the device is completely removed to prevent electric shock. To disconnect power, unplug all power cords (one for each power supply).
Power Cable Warning (Japanese) |
|---|
Warning: The attached power cable is only for this product. Do not use the cable for another product.  |
