- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- Installing an MX2008 Router Overview
- Unpacking the MX2008
- Installing the MX2008
- Connecting the MX2008 to Earth Ground
- Connecting the MX2008 to AC Power
- Connecting the MX2008 to DC Power
- Connecting the MX2008 to High-Voltage Power
- Connecting the MX2008 to the Network
- Register Products—Mandatory to Validate SLAs
- Initially Configuring the MX2008 Router
- play_arrow Maintaining Components
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
MX2000 Three-Phase AC Power Electrical Safety Guidelines
The following electrical safety guidelines apply to AC-powered MX2000 series routers with three-phase AC power distribution modules:
AC-powered routers are shipped with three-phase electrical cords with grounding. Do not circumvent this safety feature. Equipment grounding must comply with local and national electrical codes.
The delta cores in the terminal block are labeled as follows:
Terminal block labeled GND—Earth
Terminal block labeled A1
Terminal block labeled B1
Terminal block labeled C1
Terminal block labeled GND—Earth
Terminal block labeled A2
Terminal block labeled B2
Terminal block labeled C2
The wye cores in the terminal block are labeled as follows:
Terminal block labeled GND—Earth
Terminal block labeled A1
Terminal block labeled B1
Terminal block labeled C1
Terminal block labeled N1
Terminal block labeled GND—Earth
Terminal block labeled A2
Terminal block labeled B2
Terminal block labeled C2
Terminal block labeled N2