Verifying the MX2020 Parts Received
A packing list is included in each shipment. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and descriptions of each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in Table 1, and an accessory box, which contains the parts listed in Table 2. The parts shipped with your router can vary depending on the configuration you ordered.
|
Component |
Quantity |
|---|---|
|
Chassis, including backplane, and craft interface. |
1 |
|
Standard EMI covers |
2 |
|
Extended EMI covers (optional) |
2 |
|
Large mounting shelf |
1 |
|
MPCs |
Up to 20 |
|
ADCs |
Up to 20 |
|
MICs |
Up to 40 |
|
SFBs |
Up to 8 |
|
Combed Control Board with Routing Engines (CB-REs) |
1 or 2 |
|
Power distribution modules (PDMs) |
Up to 4 |
|
Power supply modules (PSMs) |
Up to 18 |
|
Fan trays |
4 |
|
Air baffle (optional) |
1 |
|
PSM air filter |
2 |
|
Air filter (lower) |
1 |
|
Standard upper cable manager |
1 |
|
Middle cable manager and air filter |
1 |
|
Standard lower cable manager |
1 |
|
Standard DC cable manager |
4 |
|
Extended upper cable manager (optional) |
1 |
|
Extended lower cable manager (optional) |
1 |
|
Extended DC cable manager (optional) |
4 |
|
Quick start installation instructions |
1 |
|
Blank panels for slots without components installed |
One blank panel for each slot not occupied by a component. |
|
Part |
Quantity |
|---|---|
|
Screws to mount chassis |
14 |
|
Terminal block plug, 3 pole, 5.08 mm spacing, 12 A, to connect the router alarms |
2 |
|
Label, accessories contents, MX2020 |
1 |
|
USB flash drive with Junos OS |
1 |
|
Read me first document |
1 |
|
Affidavit for T1 connection |
1 |
|
Juniper Networks Product Warranty |
1 |
|
End User License Agreement |
1 |
|
Document sleeve |
1 |
|
3" x 5" pink bag |
2 |
|
9" x 12" pink bag, ESD |
2 |
|
Accessory Box, 19 x 12 x 3" |
1 |
|
ESD wrist strap with cable |
1 |
We no longer include the RJ-45 console cable with the DB-9 adapter as part of the device package. If the console cable and adapter are not included in your device package, or if you need a different type of adapter, you can order the following separately:
-
RJ-45 to DB-9 adapter (JNP-CBL-RJ45-DB9)
-
RJ-45 to USB-A adapter (JNP-CBL-RJ45-USBA)
-
RJ-45 to USB-C adapter (JNP-CBL-RJ45-USBC)
If you want to use RJ-45 to USB-A or RJ-45 to USB-C adapter you must have X64 (64-Bit) Virtual COM port (VCP) driver installed on your PC. See, https://ftdichip.com/drivers/vcp-drivers/ to download the driver.