close
keyboard_arrow_left
Table of Contents
- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow MX2020 System Overview and Architecture
- MX2020 Universal Edge Router Overview
- MX Series Router Architecture
- MX2020 Chassis Description
- MX2020 Backplane Description
- MX2020 Component Redundancy
- MX2020 Field-Replaceable Units
- MX Series Router Packet Forwarding Engine (PFE) Architecture
- Line Cards Supported on MX Series Routers
- Ethernet Frame Counts and Statistics on MX Series Routers
- MX2020 Router Hardware Components and CLI Terminology
- Understanding Trio Layer 2 Feature Parity
- play_arrow Alarm and Display Components
- play_arrow Cable and Rack Management
- play_arrow Cooling System Components and Descriptions
- play_arrow Host Subsystem Components
- MX2000 Host Subsystem CB-RE Description
- RE-MX2000-1800x4 CB-RE Description
- REMX2K-X8-64G and REMX2K-X8-64G-LT CB-RE Description
- CB-RE LEDs
- REMX2K-X8-128G CB-RE Description
- MX2000 Switch Fabric Board (SFB) Overview
- MX2000-SFB-S Switch Fabric Board Description
- MX2000-SFB2-S Enhanced Switch Fabric Board Description
- MX2000-SFB3 Switch Fabric Board Description
- play_arrow Interface Modules— ADCs, MPCs, and MICs
- MX Series Interface Module Reference
- MX2000 Modular Interface Card (MIC) Description
- MICs Supported by MX Series Routers
- MX2020 Modular Interface Card LEDs
- MX2020 Modular Port Concentrator (MPC) Description
- MPCs Supported by MX Series Routers
- MX2020 Modular Port Concentrator LEDs
- MX2000 Adapter Card (ADC) Description
- MPC Terminology
- MX2020 Port and Interface Numbering
- play_arrow Power Subsystem
- MX2020 Power Subsystem Description
- MX2020 Power Midplane Description
- MX2000 Three-Phase Delta AC Power Distribution Module Description
- MX2000 Three-Phase Wye AC Power Distribution Module Description
- MX2000 Seven-Feed Single-Phase AC Power Distribution Module Description
- MX2000 Nine-Feed Single-Phase AC Power Distribution Module Description
- MX2000 Three-Phase Delta and Wye AC Power Distribution Module LEDs
- MX2000 AC Power Supply Module Description
- MX2020 AC Power Supply Module LEDs
- MX2020 DC Power Distribution Module (-48 V) Description
- MX2000 DC Power Distribution Module (240 V China) Description
- MX2020 DC Power Distribution Module (-48 V) LEDs
- MX2000 DC Power Distribution Module (240 V China) LEDs
- MX2020 DC Power Supply Module (-48 V) Description
- MX2000 DC Power Supply Module (240 V China) Description
- MX2020 DC Power Supply Module LEDs
- MX2000 High-Voltage Universal (HVAC/HVDC) Power Distribution Module Description
- MX2000 High-Voltage Universal (HVAC/HVDC) Power Distribution Module LEDs
- MX2000 High-Voltage Universal (HVAC/HVDC) Power Supply Module Description
- MX2020 High-Voltage Universal Power Supply Module LEDs
-
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Planning and Preparing the Site
- Overview of Preparing the Site for the MX2020 Router
- MX2020 Site Preparation Checklist
- MX2020 Physical Specifications
- MX2020 Rack Requirements
- MX2020 Cabinet Size and Clearance Requirements
- Clearance Requirements for Airflow and Hardware Maintenance for the MX2020 Router
- MX2020 Cabinet Airflow Requirements
- MX2020 Router Environmental Specifications
- MX2000 Router Grounding Specifications
- MX2020 Chassis Moving Guidelines
- MX2020 Moving Requirements and Guidelines Using a Router Transport Kit
- Rack-Mounting Requirements
- play_arrow Transceiver and Cable Specifications
- play_arrow Pinout Specifications
- RJ-45 Connector Pinouts for MX Series CB-RE Auxiliary and Console Ports
- RJ-45 Connector Pinouts for an MX Series CB-RE or RCB Management Port
- Management Cable Specifications
- Console Port Connector Pinout Information
- RJ-45 to DB-9 Serial Port Adapter Pinout Information
- Mini-USB Port Pinout Specifications
- RJ-45 Management Port Connector Pinout Information
- RJ-45 Port, SFP Port, SFP+ Port, QSFP+ Port, and QSFP28 Port Connector Pinout Information
- play_arrow AC Power Requirements, Specifications, and Guidelines
- MX2020 AC Power Requirements
- MX2000 AC Power Cord Specifications
- MX2000 AC Power System Electrical Specifications
- MX2000 Router Grounding Specifications
- MX2000 Three-Phase Delta AC Power Distribution Module Electrical Specifications
- MX2000 Three-Phase Wye AC Power Distribution Module Electrical Specifications
- MX2000 Single-Phase AC Power Distribution Module Electrical Specifications
- Calculating AC Power Requirements for MX2020 Routers
- Mapping Input Power from AC Power Distribution Modules to AC Power Supply Modules on MX2000 Routers
- play_arrow DC Power Requirements, Specifications, and Guidelines
- MX2020 DC Power Requirements
- MX2020 DC Power Distribution Description
- MX2020 DC Power Distribution (240 V China) Description
- MX2000 Router DC (-48 V) Power Subsystem Electrical Specifications
- MX2000 Router DC (240 V China) Power Subsystem Electrical Specifications
- Determining DC Power Requirements for Your MX2020 Router
- DC Power (-48 V) Circuit Breaker Requirements for the MX2020 Router
- DC Power (240 V China) Circuit Breaker Requirements for the MX2000 Router
- DC Power Cable Specifications for the MX2020 Router
- play_arrow Universal (HVAC/HVDC) Power Requirements, Specifications, and Guidelines
- MX2020 High-Voltage Universal Power Requirements
- MX2000 High-Voltage Universal PDM (MX2K-PDM-HV) Power Cord Specifications
- MX2000 Router High-Voltage Universal (HVAC/HVDC) Power Subsystem Electrical Specifications
- Determining High-Voltage Universal Power Requirements for Your MX2020 Router
- High-Voltage Universal (HVAC/HVDC) Power Circuit Breaker Requirements for the MX2000 Router
-
- play_arrow Initial Installation and Configuration
- play_arrow Installation Overview
- Installing an MX2020 Router Overview
- Tools and Parts Required to Unpack the MX2020 Router
- Tools Required to Install the MX2020 Router Using a Pallet Jack
- Tools Required to Install the MX2020 Router Using a Router Transport Kit
- Tools and Parts Required for Connecting an MX2000 Router to Power
- Tools and Parts Required to Maintain the MX2020 Hardware Components
- Tools and Parts Required for MX2020 Router Connections
- play_arrow Unpacking the Router
- play_arrow Installing the Mounting Hardware
- play_arrow Installing the Router
- Removing Components from the MX2020 Router Chassis Before Installing it in a Rack
- Installing a MX2020 Router Using a Pallet Jack Overview
- Installing the Pallet Jack Attachment
- Installing the MX2020 Router Using a Pallet Jack with Attachment
- Installing a MX2020 Router Using a Router Transport Kit Overview
- Installing the Router Transport Kit on the MX2020 Router
- Securing the MX2020 Router to the Router Transport Platform
- Installing the MX2020 Router Using a Router Transport Kit
- Reinstalling Components in the MX2020 Router After Installing in a Rack
- play_arrow Connecting the MX2020 to Ground
- play_arrow Providing Power to the MX2020
- Connecting Power to an MX2000 Single-Phase AC Power Distribution Module
- Connecting AC Power to an MX2000 Router with Three-Phase Delta AC Power Distribution Modules
- Connecting AC Power to an MX2000 Router with Three-Phase Wye AC Power Distribution Modules
- Mapping Input Power from AC Power Distribution Modules to AC Power Supply Modules on MX2000 Routers
- Installing MX2020 AC Power Supply Modules
- Installing MX2000 Router DC Power Supply Modules (-48 V)
- Installing MX2000 Router DC Power Supply Modules (240 V China) or High-Voltage Universal (HVAC/HVDC) Power Supply Modules
- Connecting Power to a DC-Powered MX2020 Router with Power Distribution Modules (-48 V)
- Connecting Power to a DC-Powered MX2000 Router with DC Power Distribution Modules (240 V China)
- Connecting an MX2000 DC Router Power Distribution Module (-48 V) Cable
- Connecting an MX2000 DC Router Power Distribution Module (240 V China) Cable
- Connecting Power to a High Voltage-Powered MX2000 Router with Power Distribution Modules
- Powering On the DC-Powered (-48 V) MX2020 Router
- Powering On the DC-Powered (240 V China) MX2000 Router
- Powering On a Three-Phase AC-Powered MX2000 Router
- Powering On the High-Voltage Powered Universal (HVAC/HVDC) MX2000 Router
- play_arrow Connecting the MX2020 to the Network
- Connecting the MX2020 Router to Management and Alarm Devices
- Connecting the MX2020 Router to a Network for Out-of-Band Management
- Connecting the MX2020 Router to a Console or Auxiliary Device
- Connecting an MX2020 Router to an External Alarm-Reporting Device
- Connecting the Alarm Relay Wires to the MX2020 Craft Interface
- Disconnecting the Alarm Relay Wires from the MX2020 Craft Interface
- Connecting MPC or MIC Cables to the MX2020 Router
- Register Products—Mandatory to Validate SLAs
- play_arrow Configuring the Junos OS Software
-
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
- play_arrow Contacting Customer Support
- play_arrow Locating Component Serial Numbers
- Displaying MX2020 Router Components and Serial Numbers
- MX2020 CB-RE Serial Number Label
- MX2020 Craft Interface Serial Number Label
- MX2020 Fan Tray Serial Number Label
- MX2020 MIC Serial Number Label
- MX2020 MPC Serial Number Label
- MX2020 Power Distribution Module Serial Number Label
- MX2020 Power Supply Module Serial Number Label
- MX2020 SFB Serial Number Label
- play_arrow Packing and Returning Components
-
- play_arrow Safety and Compliance Information
- play_arrow General Safety Guidelines and Warnings
- play_arrow Installation and Maintenance Safety Guidelines and Warnings
- play_arrow Radiation and Laser Warnings
- play_arrow Maintenance and Operational Safety Guidelines and Warnings
- play_arrow Electrical Safety Guidelines and Warnings
- General Electrical Safety Guidelines and Warnings
- Prevention of Electrostatic Discharge Damage
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- DC Power Copper Conductors Warning
- DC Power Disconnection Warning
- DC Power Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Midplane Energy Hazard Warning
- Multiple Power Supplies Disconnection Warning
- Action to Take After an Electrical Accident
- play_arrow Agency Approvals and Compliance Statements
-
list Table of Contents
Maintaining MX2020 MPCs
date_range
09-Mar-21
Purpose
The router can have up to 20 Modular Port Concentrators (MPCs) mounted vertically in the MPC card cage at the front of the chassis. For optimum router performance, verify the condition of the MPCs.
Action
On a regular basis:
Check the LEDs on the craft interface directly above each MPC slot. The green LED labeled OK lights steadily when a MPC is functioning normally.
Check the OK/FAIL LED on the MPC. For more information, see MX Series Interface Module Reference. If the MPC detects a failure, the MPC sends an alarm message to the Routing Engine.
Check the status of installed MPCs by issuing the CLI
show chassis fpccommand to check the status of installed MPCs. As shown in the sample output, the value Online in the column labeled State indicates that the MPC is functioning normally:content_copy zoom_out_mapuser@host> show chassis fpc Temp CPU Utilization (%) Memory Utilization (%) Slot State (C) Total Interrupt DRAM (MB) Heap Buffer 0 Empty 1 Empty 2 Empty 3 Empty 4 Online 28 11 0 2048 15 14 5 Empty 6 Empty 7 Online 30 8 0 2048 14 13 8 Online 29 10 0 2048 11 13 9 Online 31 12 0 2048 16 14 10 Present 28 11 Online 38 16 2 2048 16 14 12 Empty 13 Empty 14 Empty 15 Online 36 11 0 2048 15 14 16 Empty 17 Empty 18 Online 31 10 0 2048 18 13 19 EmptyFor more detailed output, add the detail option. The following example does not specify a slot number, which is optional:
content_copy zoom_out_mapuser@host> show chassis fpc detail Slot 4 information: State Online Temperature 28 Total CPU DRAM 2048 MB Total RLDRAM 1036 MB Total DDR DRAM 11264 MB Start time: 2012-11-26 16:20:07 PST Uptime: 18 hours, 6 minutes, 1 second Max Power Consumption 610 Watts Slot 7 information: State Online Temperature 30 Total CPU DRAM 2048 MB Total RLDRAM 1036 MB Total DDR DRAM 6656 MB Start time: 2012-11-26 16:20:12 PST Uptime: 18 hours, 5 minutes, 56 seconds Max Power Consumption 520 Watts Slot 8 information: State Online Temperature 29 Total CPU DRAM 2048 MB Total RLDRAM 662 MB Total DDR DRAM 2560 MB Start time: 2012-11-26 16:20:18 PST Uptime: 18 hours, 5 minutes, 50 seconds Max Power Consumption 348 Watts Slot 9 information: State Online Temperature 31 Total CPU DRAM 2048 MB Total RLDRAM 1036 MB Total DDR DRAM 11264 MB Start time: 2012-11-26 17:34:36 PST Uptime: 16 hours, 51 minutes, 32 seconds Max Power Consumption 610 Watts Slot 10 information: State Present Temperature 28 Total CPU DRAM 0 MB Total RLDRAM 0 MB Total DDR DRAM 0 MB Max Power Consumption 440 Watts Slot 11 information: State Online Temperature 38 Total CPU DRAM 2048 MB Total RLDRAM 1036 MB Total DDR DRAM 11264 MB Start time: 2012-11-26 16:20:33 PST Uptime: 18 hours, 5 minutes, 35 seconds Max Power Consumption 610 Watts Slot 15 information: State Online Temperature 36 Total CPU DRAM 2048 MB Total RLDRAM 1036 MB Total DDR DRAM 11264 MB Start time: 2012-11-26 16:20:40 PST Uptime: 18 hours, 5 minutes, 28 seconds Max Power Consumption 610 Watts Slot 18 information: State Online Temperature 31 Total CPU DRAM 2048 MB Total RLDRAM 1324 MB Total DDR DRAM 5120 MB Start time: 2012-11-26 16:20:46 PST Uptime: 18 hours, 5 minutes, 22 seconds Max Power Consumption 440 Watts
Issue the CLI
show chassis fpc pic-statuscommand. The MPC slots are numbered from 0 through 9 (bottom), and 10 through 19 (top), left to right:content_copy zoom_out_mapuser@host> show chassis fpc pic-status Slot 4 Online MPC4E 3D 2CGE+8XGE PIC 0 Online 4x10GE SFPP PIC 1 Online 1X100GE CFP PIC 2 Online 4x10GE SFPP PIC 3 Online 1X100GE CFP Slot 7 Online MPCE Type 3 3D PIC 0 Online 1X100GE CFP PIC 2 Online 1x 10GE XFP PIC 3 Online 1x 10GE XFP Slot 8 Online MPC Type 2 3D PIC 0 Online 1x 10GE XFP PIC 1 Online 1x 10GE XFP PIC 2 Online 10x 1GE(LAN) SFP PIC 3 Online 10x 1GE(LAN) SFP Slot 9 Online MPC4E 3D 32XGE PIC 0 Online 8X10GE SFPP PIC 1 Online 8X10GE SFPP PIC 2 Online 8X10GE SFPP PIC 3 Online 8X10GE SFPP Slot 10 Present MPC 3D 16x 10GE Slot 11 Online MPC4E 3D 32XGE PIC 0 Online 8X10GE SFPP PIC 1 Online 8X10GE SFPP PIC 2 Online 8X10GE SFPP PIC 3 Online 8X10GE SFPP Slot 15 Online MPC4E 3D 2CGE+8XGE PIC 0 Online 4x10GE SFPP PIC 1 Online 1X100GE CFP PIC 2 Online 4x10GE SFPP PIC 3 Online 1X100GE CFP Slot 18 Online MPC 3D 16x 10GE PIC 0 Online 4x 10GE(LAN) SFP+ PIC 1 Online 4x 10GE(LAN) SFP+ PIC 2 Online 4x 10GE(LAN) SFP+ PIC 3 Online 4x 10GE(LAN) SFP+
For further description of the output from the command, see the Junos OS System Basics and Services Command Reference.
