close
keyboard_arrow_left
Table of Contents
- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow MX2020 System Overview and Architecture
- MX2020 Universal Edge Router Overview
- MX Series Router Architecture
- MX2020 Chassis Description
- MX2020 Backplane Description
- MX2020 Component Redundancy
- MX2020 Field-Replaceable Units
- MX Series Router Packet Forwarding Engine (PFE) Architecture
- Line Cards Supported on MX Series Routers
- Ethernet Frame Counts and Statistics on MX Series Routers
- MX2020 Router Hardware Components and CLI Terminology
- Understanding Trio Layer 2 Feature Parity
- play_arrow Alarm and Display Components
- play_arrow Cable and Rack Management
- play_arrow Cooling System Components and Descriptions
- play_arrow Host Subsystem Components
- MX2000 Host Subsystem CB-RE Description
- RE-MX2000-1800x4 CB-RE Description
- REMX2K-X8-64G and REMX2K-X8-64G-LT CB-RE Description
- CB-RE LEDs
- REMX2K-X8-128G CB-RE Description
- MX2000 Switch Fabric Board (SFB) Overview
- MX2000-SFB-S Switch Fabric Board Description
- MX2000-SFB2-S Enhanced Switch Fabric Board Description
- MX2000-SFB3 Switch Fabric Board Description
- play_arrow Interface Modules— ADCs, MPCs, and MICs
- MX Series Interface Module Reference
- MX2000 Modular Interface Card (MIC) Description
- MICs Supported by MX Series Routers
- MX2020 Modular Interface Card LEDs
- MX2020 Modular Port Concentrator (MPC) Description
- MPCs Supported by MX Series Routers
- MX2020 Modular Port Concentrator LEDs
- MX2000 Adapter Card (ADC) Description
- MPC Terminology
- MX2020 Port and Interface Numbering
- play_arrow Power Subsystem
- MX2020 Power Subsystem Description
- MX2020 Power Midplane Description
- MX2000 Three-Phase Delta AC Power Distribution Module Description
- MX2000 Three-Phase Wye AC Power Distribution Module Description
- MX2000 Seven-Feed Single-Phase AC Power Distribution Module Description
- MX2000 Nine-Feed Single-Phase AC Power Distribution Module Description
- MX2000 Three-Phase Delta and Wye AC Power Distribution Module LEDs
- MX2000 AC Power Supply Module Description
- MX2020 AC Power Supply Module LEDs
- MX2020 DC Power Distribution Module (-48 V) Description
- MX2000 DC Power Distribution Module (240 V China) Description
- MX2020 DC Power Distribution Module (-48 V) LEDs
- MX2000 DC Power Distribution Module (240 V China) LEDs
- MX2020 DC Power Supply Module (-48 V) Description
- MX2000 DC Power Supply Module (240 V China) Description
- MX2020 DC Power Supply Module LEDs
- MX2000 High-Voltage Universal (HVAC/HVDC) Power Distribution Module Description
- MX2000 High-Voltage Universal (HVAC/HVDC) Power Distribution Module LEDs
- MX2000 High-Voltage Universal (HVAC/HVDC) Power Supply Module Description
- MX2020 High-Voltage Universal Power Supply Module LEDs
-
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Planning and Preparing the Site
- Overview of Preparing the Site for the MX2020 Router
- MX2020 Site Preparation Checklist
- MX2020 Physical Specifications
- MX2020 Rack Requirements
- MX2020 Cabinet Size and Clearance Requirements
- Clearance Requirements for Airflow and Hardware Maintenance for the MX2020 Router
- MX2020 Cabinet Airflow Requirements
- MX2020 Router Environmental Specifications
- MX2000 Router Grounding Specifications
- MX2020 Chassis Moving Guidelines
- MX2020 Moving Requirements and Guidelines Using a Router Transport Kit
- Rack-Mounting Requirements
- play_arrow Transceiver and Cable Specifications
- play_arrow Pinout Specifications
- RJ-45 Connector Pinouts for MX Series CB-RE Auxiliary and Console Ports
- RJ-45 Connector Pinouts for an MX Series CB-RE or RCB Management Port
- Management Cable Specifications
- Console Port Connector Pinout Information
- RJ-45 to DB-9 Serial Port Adapter Pinout Information
- Mini-USB Port Pinout Specifications
- RJ-45 Management Port Connector Pinout Information
- RJ-45 Port, SFP Port, SFP+ Port, QSFP+ Port, and QSFP28 Port Connector Pinout Information
- play_arrow AC Power Requirements, Specifications, and Guidelines
- MX2020 AC Power Requirements
- MX2000 AC Power Cord Specifications
- MX2000 AC Power System Electrical Specifications
- MX2000 Router Grounding Specifications
- MX2000 Three-Phase Delta AC Power Distribution Module Electrical Specifications
- MX2000 Three-Phase Wye AC Power Distribution Module Electrical Specifications
- MX2000 Single-Phase AC Power Distribution Module Electrical Specifications
- Calculating AC Power Requirements for MX2020 Routers
- Mapping Input Power from AC Power Distribution Modules to AC Power Supply Modules on MX2000 Routers
- play_arrow DC Power Requirements, Specifications, and Guidelines
- MX2020 DC Power Requirements
- MX2020 DC Power Distribution Description
- MX2020 DC Power Distribution (240 V China) Description
- MX2000 Router DC (-48 V) Power Subsystem Electrical Specifications
- MX2000 Router DC (240 V China) Power Subsystem Electrical Specifications
- Determining DC Power Requirements for Your MX2020 Router
- DC Power (-48 V) Circuit Breaker Requirements for the MX2020 Router
- DC Power (240 V China) Circuit Breaker Requirements for the MX2000 Router
- DC Power Cable Specifications for the MX2020 Router
- play_arrow Universal (HVAC/HVDC) Power Requirements, Specifications, and Guidelines
- MX2020 High-Voltage Universal Power Requirements
- MX2000 High-Voltage Universal PDM (MX2K-PDM-HV) Power Cord Specifications
- MX2000 Router High-Voltage Universal (HVAC/HVDC) Power Subsystem Electrical Specifications
- Determining High-Voltage Universal Power Requirements for Your MX2020 Router
- High-Voltage Universal (HVAC/HVDC) Power Circuit Breaker Requirements for the MX2000 Router
-
- play_arrow Initial Installation and Configuration
- play_arrow Installation Overview
- Installing an MX2020 Router Overview
- Tools and Parts Required to Unpack the MX2020 Router
- Tools Required to Install the MX2020 Router Using a Pallet Jack
- Tools Required to Install the MX2020 Router Using a Router Transport Kit
- Tools and Parts Required for Connecting an MX2000 Router to Power
- Tools and Parts Required to Maintain the MX2020 Hardware Components
- Tools and Parts Required for MX2020 Router Connections
- play_arrow Unpacking the Router
- play_arrow Installing the Mounting Hardware
- play_arrow Installing the Router
- Removing Components from the MX2020 Router Chassis Before Installing it in a Rack
- Installing a MX2020 Router Using a Pallet Jack Overview
- Installing the Pallet Jack Attachment
- Installing the MX2020 Router Using a Pallet Jack with Attachment
- Installing a MX2020 Router Using a Router Transport Kit Overview
- Installing the Router Transport Kit on the MX2020 Router
- Securing the MX2020 Router to the Router Transport Platform
- Installing the MX2020 Router Using a Router Transport Kit
- Reinstalling Components in the MX2020 Router After Installing in a Rack
- play_arrow Connecting the MX2020 to Ground
- play_arrow Providing Power to the MX2020
- Connecting Power to an MX2000 Single-Phase AC Power Distribution Module
- Connecting AC Power to an MX2000 Router with Three-Phase Delta AC Power Distribution Modules
- Connecting AC Power to an MX2000 Router with Three-Phase Wye AC Power Distribution Modules
- Mapping Input Power from AC Power Distribution Modules to AC Power Supply Modules on MX2000 Routers
- Installing MX2020 AC Power Supply Modules
- Installing MX2000 Router DC Power Supply Modules (-48 V)
- Installing MX2000 Router DC Power Supply Modules (240 V China) or High-Voltage Universal (HVAC/HVDC) Power Supply Modules
- Connecting Power to a DC-Powered MX2020 Router with Power Distribution Modules (-48 V)
- Connecting Power to a DC-Powered MX2000 Router with DC Power Distribution Modules (240 V China)
- Connecting an MX2000 DC Router Power Distribution Module (-48 V) Cable
- Connecting an MX2000 DC Router Power Distribution Module (240 V China) Cable
- Connecting Power to a High Voltage-Powered MX2000 Router with Power Distribution Modules
- Powering On the DC-Powered (-48 V) MX2020 Router
- Powering On the DC-Powered (240 V China) MX2000 Router
- Powering On a Three-Phase AC-Powered MX2000 Router
- Powering On the High-Voltage Powered Universal (HVAC/HVDC) MX2000 Router
- play_arrow Connecting the MX2020 to the Network
- Connecting the MX2020 Router to Management and Alarm Devices
- Connecting the MX2020 Router to a Network for Out-of-Band Management
- Connecting the MX2020 Router to a Console or Auxiliary Device
- Connecting an MX2020 Router to an External Alarm-Reporting Device
- Connecting the Alarm Relay Wires to the MX2020 Craft Interface
- Disconnecting the Alarm Relay Wires from the MX2020 Craft Interface
- Connecting MPC or MIC Cables to the MX2020 Router
- Register Products—Mandatory to Validate SLAs
- play_arrow Configuring the Junos OS Software
-
- play_arrow Installing, Replacing, and Maintaining MX2020 Router Components
- play_arrow Required Tools and Parts
- play_arrow Installing, Removing, and Maintaining Power Components
- Replacing an MX2000 Three-Phase Delta AC Power Distribution Module
- Replacing an MX2020 Three-Phase Wye AC Power Distribution Module
- Removing an MX2000 Single-Phase AC Power Distribution Module
- Installing an MX2000 Single-Phase AC Power Distribution Module
- Replacing an MX2000 DC Power Distribution Module (-48 V)
- Replacing an MX2000 DC Power Distribution Module (240 V China)
- Replacing an MX2000 High-Voltage Universal (HVAC/HVDC) Power Distribution Module
- Replacing an MX2020 DC Power Supply Module (-48 V)
- Replacing an MX2000 DC Power Supply Module (240 V China)
- Replacing an MX2000 High-Voltage Second-Generation Universal (HVAC/HVDC) Power Supply Module
- Replacing an MX2000 AC Power Supply Module
- Maintaining the Power Supply Modules on the MX2000 Line of Routers
- Maintaining the MX2020 Power Usage
- Converting an MX2000 Router Between AC and DC Power
- play_arrow Installing, Removing, and Maintaining Cooling System Components
- Replacing an MX2020 Fan Tray
- Maintaining the MX2020 Fan Trays
- Removing the MX2020 Air Filter
- Installing an MX2020 Air Filter
- Maintaining the MX2020 Air Filter
- Maintaining the MX2020 Air Vents
- Removing the MX2020 Air Baffle
- Installing the MX2020 Air Baffle
- Maintaining the MX2020 Cooling System Components
- Maintaining the MX2020 Cooling System Zones
- play_arrow Installing, Removing, and Maintaining Host Subsystem Components
- Maintaining the MX2020 Host Subsystem
- Replacing an MX2000 SFB
- Maintaining the Switch Fabric Board (SFB)
- Replacing an MX2000 CB-RE
- Maintaining the MX2020 Control Boards
- Maintaining the MX2020 Routing Engines
- Upgrading to the Control Board-Routing Engine REMX2K-X8-64G in a Redundant Host Subsystem
- Upgrading to the REMX2K-X8-64G CB-RE in a Nonredundant Host Subsystem
- Maintaining the MX2020 Switch Processor Mezzanine Board (SPMB)
- Maintaining MX2020 Packet Forwarding Engine Components
- play_arrow Installing, Removing, and Maintaining Interface Modules— ADCs, MPCs, and MICs
- Holding an MPC
- Storing an MX2020 MPC
- Replacing an MX2020 MPC and Adapter Card (ADC)
- Maintaining MX2020 MPCs
- Maintaining MX2020 Adapter Cards
- Replacing an MX2020 MIC
- Maintaining MX2020 MICs
- Replacing an SFP or XFP Transceiver on an MX2020 MPC or MIC
- Installing an SFP or XFP into an MX2000 MPC or MIC
- Installing an MX2020 Dual-Wide MIC
- Install a Transceiver
- Remove a Transceiver
- Replacing a CFP2 Transceiver
- play_arrow Installing, Replacing, and Maintaining the Craft Interface
- play_arrow Installing, Removing, and Replacing EMI Covers
- play_arrow Installing, Replacing, and Maintaining Cables and Cable Managers
- Replacing a Cable on an MX2020 MPC or MIC
- Maintaining Cables That Connect to MX2020 MPCs or MICs
- Removing the MX2020 DC Cable Manager
- Installing the MX2020 DC Cable Manager
- Replacing the MX2020 Cable Managers
- Replacing the MX2020 Extended Cable Managers
- Removing the MX2020 Lower Cable Manager
- Installing the MX2020 Lower Cable Manager
- Removing the MX2020 Upper Cable Manager
- Installing the MX2020 Upper Cable Manager
- Replacing an MX2020 Three-Phase Delta AC Power Cord
- Replacing an MX2020 Three-Phase Wye AC Power Cord
- Replacing an MX2020 DC Power Distribution Module Cable
- Connect a Device to a Management Console Using an RJ‑45 Connector
- Connect a Fiber-Optic Cable
- Disconnect a Fiber-Optic Cable
- How to Handle Fiber-Optic Cables
- play_arrow Powering Off the Router
- play_arrow Maintaining the Chassis and Components
- Routine Maintenance Procedures for the MX2020 Router
- Taking an MX2000 Host Subsystem Offline
- Maintaining the MX2020 Chassis FRU Power On Sequence
- Maintaining and Verifying the Status of the MX2020 Router Components
- Maintaining the MX2020 Ethernet Switch
- Maintaining and Verifying the MX2020 Router Version
-
- play_arrow Troubleshooting Hardware
- play_arrow Safety and Compliance Information
- play_arrow General Safety Guidelines and Warnings
- play_arrow Installation and Maintenance Safety Guidelines and Warnings
- play_arrow Radiation and Laser Warnings
- play_arrow Maintenance and Operational Safety Guidelines and Warnings
- play_arrow Electrical Safety Guidelines and Warnings
- General Electrical Safety Guidelines and Warnings
- Prevention of Electrostatic Discharge Damage
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- DC Power Copper Conductors Warning
- DC Power Disconnection Warning
- DC Power Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Midplane Energy Hazard Warning
- Multiple Power Supplies Disconnection Warning
- Action to Take After an Electrical Accident
- play_arrow Agency Approvals and Compliance Statements
-
list Table of Contents
Displaying MX2020 Router Components and Serial Numbers
date_range
09-Mar-21
Before contacting Juniper Networks, Inc. to request a Return Materials Authorization (RMA), you must find the serial number on the router or component. To display all the router components and their serial numbers, enter the following command-line interface (CLI) command:
The sample output below shows the DC power chassis hardware:
content_copy zoom_out_map
user@host> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN11E336EAFJ MX2020
Midplane REV 29 750-040240 ABAB9382 Lower Power Midplane
Midplane 1 REV 04 711-032386 ABAB9385 Upper Backplane
PMP 1 REV 05 711-032428 ACAJ1526 Upper Power Midplane
PMP 0 REV 04 711-032426 ACAJ1585 Lower Power Midplane
FPM Board REV 06 760-040242 ABBT8836 Front Panel Display
PSM 4 REV 03 740-045050 1EDB23500AF DC 52V Power Supply Module
PSM 5 REV 01 740-045050 1E02224005Z DC 52V Power Supply Module
PSM 6 REV 01 740-045050 1E022240058 DC 52V Power Supply Module
PSM 7 REV 01 740-045050 1E02224005B DC 52V Power Supply Module
PSM 8 REV 01 740-045050 1E02224005A DC 52V Power Supply Module
PSM 13 REV 01 740-045050 1E02224005W DC 52V Power Supply Module
PSM 14 REV 01 740-045050 1E02224006W DC 52V Power Supply Module
PSM 15 REV 01 740-045050 1E02224004L DC 52V Power Supply Module
PSM 16 REV 01 740-045050 1E022240051 DC 52V Power Supply Module
PSM 17 REV 01 740-045050 1E022240052 DC 52V Power Supply Module
PDM 0 REV 0B 740-038109 VJ00014 DC Power Dist Module
PDM 1 REV 0B 740-038109 VJ00018 DC Power Dist Module
PDM 2 REV 01 740-045234 1EFA2350022 DC Power Dist Module
PDM 3 REV 01 740-045234 1EFA2350008 DC Power Dist Module
Routing Engine 0 REV 02 740-041821 9009099715 RE-S-1800x4
Routing Engine 1 REV 02 740-041821 9009099711 RE-S-1800x4
CB 0 REV 12 750-040257 CAAD9502 Control Board
CB 1 REV 12 750-040257 CAAD9499 Control Board
SPMB 0 REV 02 711-041855 ABBS1475 PMB Board
SPMB 1 REV 02 711-041855 ABBS1481 PMB Board
SFB 0 REV 03 711-044466 ABBV6799 Switch Fabric Board
SFB 1 REV 03 711-044466 ABBV6800 Switch Fabric Board
SFB 2 REV 03 711-044466 ABBV6806 Switch Fabric Board
SFB 3 REV 03 711-044466 ABBV6822 Switch Fabric Board
SFB 4 REV 03 711-044466 ABBV6791 Switch Fabric Board
SFB 5 REV 03 711-044466 ABBV6817 Switch Fabric Board
SFB 6 REV 05 711-044466 ABBX5679 Switch Fabric Board
SFB 7 REV 05 711-044466 ABBX5696 Switch Fabric Board
FPC 4 REV 09 750-037355 CAAF0937 MPC4E 3D 2CGE+8XGE
CPU REV 08 711-035209 CAAD8004 HMPC PMB 2G
PIC 0 BUILTIN BUILTIN 4x10GE SFPP
Xcvr 0 REV 01 740-021308 19T511100949 SFP+-10G-SR
Xcvr 1 REV 01 740-021308 19T511101380 SFP+-10G-SR
Xcvr 2 REV 01 740-021308 T09D06449 SFP+-10G-SR
Xcvr 3 REV 01 740-021308 19T511101780 SFP+-10G-SR
PIC 1 BUILTIN BUILTIN 1X100GE CFP
Xcvr 0 REV 01 740-035329 X12J00034 CFP-100G-SR10
PIC 2 BUILTIN BUILTIN 4x10GE SFPP
Xcvr 1 REV 01 740-031980 AJ102XE SFP+-10G-SR
PIC 3 BUILTIN BUILTIN 1X100GE CFP
FPC 7 REV 07 750-045372 CAAL9977 MPCE Type 3 3D
CPU REV 08 711-035209 CAAL9140 HMPC PMB 2G
MIC 0 REV 18 750-033199 CAAE0300 1X100GE CFP
PIC 0 BUILTIN BUILTIN 1X100GE CFP
Xcvr 0 NON-JNPR X12J00262 CFP-100G-SR10
MIC 1 REV 18 750-028380 YG1179 3D 2x 10GE XFP
PIC 2 BUILTIN BUILTIN 1x 10GE XFP
Xcvr 0 NON-JNPR T09L20458 XFP-10G-SR
PIC 3 BUILTIN BUILTIN 1x 10GE XFP
FPC 8 REV 22 750-031089 ZT4919 MPC Type 2 3D
CPU REV 06 711-030884 ZV2480 MPC PMB 2G
MIC 0 REV 18 750-028380 YN8610 3D 2x 10GE XFP
PIC 0 BUILTIN BUILTIN 1x 10GE XFP
Xcvr 0 NON-JNPR T09G88978 XFP-10G-SR
PIC 1 BUILTIN BUILTIN 1x 10GE XFP
MIC 1 REV 26 750-028392 ZT8724 3D 20x 1GE(LAN) SFP
PIC 2 BUILTIN BUILTIN 10x 1GE(LAN) SFP
Xcvr 0 REV 01 740-011782 P8Q2318 SFP-SX
Xcvr 4 REV 01 740-011782 PCH2P6F SFP-SX
PIC 3 BUILTIN BUILTIN 10x 1GE(LAN) SFP
Xcvr 0 REV 01 740-011613 PE70XRB SFP-SX
Xcvr 1 REV 01 740-021309 91D104A00011 UNSUPPORTED
FPC 9 REV 11 750-037358 CAAE2204 MPC4E 3D 32XGE
CPU REV 08 711-035209 CAAD9042 HMPC PMB 2G
PIC 0 BUILTIN BUILTIN 8X10GE SFPP
PIC 1 BUILTIN BUILTIN 8X10GE SFPP
PIC 2 BUILTIN BUILTIN 8X10GE SFPP
PIC 3 BUILTIN BUILTIN 8X10GE SFPP
FPC 10 REV 30 750-028467 ZM4986 MPC 3D 16x 10GE
CPU
FPC 11 REV 11 750-037358 CAAE2184 MPC4E 3D 32XGE
CPU REV 08 711-035209 CAAE2685 HMPC PMB 2G
PIC 0 BUILTIN BUILTIN 8X10GE SFPP
Xcvr 0 REV 01 740-021308 AMH0285 SFP+-10G-SR
Xcvr 1 REV 01 740-031980 AM91AAV SFP+-10G-SR
Xcvr 2 REV 01 740-021308 ANA08EA SFP+-10G-SR
Xcvr 3 REV 01 740-021308 19T511101863 SFP+-10G-SR
Xcvr 4 REV 01 740-031980 183363A02523 SFP+-10G-SR
Xcvr 5 REV 01 740-031980 B11F00240 SFP+-10G-SR
Xcvr 6 REV 01 740-021308 19T511101870 SFP+-10G-SR
Xcvr 7 REV 01 740-031980 B11G00148 SFP+-10G-SR
PIC 1 BUILTIN BUILTIN 8X10GE SFPP
Xcvr 0 REV 01 740-031980 AJ10J9J SFP+-10G-SR
Xcvr 1 REV 01 740-021308 19T511100460 SFP+-10G-SR
Xcvr 2 REV 01 740-031980 AJ30GDY SFP+-10G-SR
Xcvr 3 REV 01 740-021308 19T511101645 SFP+-10G-SR
Xcvr 4 REV 01 740-031980 B11F00307 SFP+-10G-SR
Xcvr 5 REV 01 740-021308 AN10KV1 SFP+-10G-SR
Xcvr 6 REV 01 740-031980 153363A00048 SFP+-10G-SR
Xcvr 7 REV 01 740-031980 B11F00185 SFP+-10G-SR
PIC 2 BUILTIN BUILTIN 8X10GE SFPP
PIC 3 BUILTIN BUILTIN 8X10GE SFPP
FPC 15 REV 06 750-037355 CAAB1158 MPC4E 3D 2CGE+8XGE
CPU REV 08 711-035209 CAAB1187 HMPC PMB 2G
PIC 0 BUILTIN BUILTIN 4x10GE SFPP
PIC 1 BUILTIN BUILTIN 1X100GE CFP
PIC 2 BUILTIN BUILTIN 4x10GE SFPP
PIC 3 BUILTIN BUILTIN 1X100GE CFP
Xcvr 0 NON-JNPR X12J00358 CFP-100G-SR10
FPC 18 REV 32 750-028467 ZR2043 MPC 3D 16x 10GE
CPU REV 10 711-029089 ZT6927 AMPC PMB
PIC 0 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 REV 01 740-031980 B11F00361 SFP+-10G-SR
Xcvr 1 REV 01 740-031980 B11F00268 SFP+-10G-SR
Xcvr 2 REV 01 740-031980 AJ71BQ8 SFP+-10G-SR
Xcvr 3 REV 01 740-031980 AHP04XX SFP+-10G-SR
PIC 1 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 REV 01 740-021308 ANA0Q20 SFP+-10G-SR
Xcvr 1 REV 01 740-021308 T09H14420 SFP+-10G-SR
Xcvr 2 REV 01 740-031980 B11F00220 SFP+-10G-SR
Xcvr 3 REV 01 740-031980 B11F00254 SFP+-10G-SR
PIC 2 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 REV 01 740-031980 B10G01429 SFP+-10G-SR
Xcvr 1 REV 01 740-031980 B11G00206 SFP+-10G-SR
Xcvr 2 REV 01 740-031980 B11E02181 SFP+-10G-SR
Xcvr 3 REV 01 740-021308 AH803TP SFP+-10G-SR
PIC 3 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 REV 01 740-021308 19T511101819 SFP+-10G-SR
Xcvr 1 REV 01 740-021308 19T511100646 SFP+-10G-SR
Xcvr 2 REV 01 740-021308 T09D06573 SFP+-10G-SR
Xcvr 3 REV 01 740-021308 T09D06516 SFP+-10G-SR
ADC 4 REV 05 750-043596 CAAC2078 Adapter Card
ADC 7 REV 13 750-043596 ABBX5547 Adapter Card
ADC 8 REV 01 750-043596 ZV4088 Adapter Card
ADC 9 REV 01 750-043596 ZV4168 Adapter Card
ADC 10
ADC 11 REV 05 750-043596 CAAC2057 Adapter Card
ADC 15 REV 13 750-043596 ABBX5573 Adapter Card
ADC 18 REV 05 750-043596 CAAC2077 Adapter Card
Fan Tray 0 REV 2A 760-046960 ACAY0019 172mm FanTray - 6 Fans
Fan Tray 1 REV 2A 760-046960 ACAY0021 172mm FanTray - 6 Fans
Fan Tray 2 REV 2A 760-046960 ACAY0001 172mm FanTray - 6 Fans
Fan Tray 3 REV 03 760-046960 ACAY0123 172mm FanTray - 6 Fans
The sample output below shows the universal (HVAC/HVDC) power chassis hardware:
content_copy zoom_out_map
user@host> show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis JN1248551AFJ MX2020 Midplane REV 51 750-040240 ABAD0719 Lower Backplane Midplane 1 REV 06 711-032386 ABAD1385 Upper Backplane PMP 1 REV 05 711-032428 ACAJ3828 Upper Power Midplane PMP 0 REV 04 711-032426 ACAJ3642 Lower Power Midplane FPM Board REV 13 760-040242 ABCX9082 Front Panel Display PSM 0 Rev 01 740-075342 1EGK929000K MX2K-UNIVERSAL-HV-PSM PSM 1 Rev 01 740-075342 1EGK9290004 MX2K-UNIVERSAL-HV-PSM PSM 2 Rev 01 740-075342 1EGK929000A MX2K-UNIVERSAL-HV-PSM PSM 3 Rev 01 740-075342 1EGK929000G MX2K-UNIVERSAL-HV-PSM PSM 5 Rev 01 740-075342 1EGK929000T MX2K-UNIVERSAL-HV-PSM PSM 6 Rev 01 740-075342 1EGK9290008 MX2K-UNIVERSAL-HV-PSM PSM 7 Rev 01 740-075342 1EGK9290005 MX2K-UNIVERSAL-HV-PSM PSM 8 Rev 01 740-075342 1EGK929000W MX2K-UNIVERSAL-HV-PSM PSM 10 Rev 01 740-075342 1EGK9520007 MX2K-UNIVERSAL-HV-PSM PSM 11 Rev 01 740-075342 1EGK927001T MX2K-UNIVERSAL-HV-PSM PSM 12 Rev 01 740-075342 1EGK927001F MX2K-UNIVERSAL-HV-PSM PSM 13 Rev 01 740-075342 1EGK927001L MX2K-UNIVERSAL-HV-PSM PSM 14 Rev 01 740-075342 1EGK929000S MX2K-UNIVERSAL-HV-PSM PSM 15 Rev 01 740-075342 1EGK927001H MX2K-UNIVERSAL-HV-PSM PSM 16 Rev 01 740-075342 1EGK924001V MX2K-UNIVERSAL-HV-PSM PSM 17 Rev 01 740-075342 1EGK9290001 MX2K-UNIVERSAL-HV-PSM PDM 0 REV 01 740-087218 1EGJ8440005 MX2K-UNIVERSAL-HV-PDM PDM 1 REV 01 740-087218 1EGJ8360016 MX2K-UNIVERSAL-HV-PDM PDM 2 REV 01 740-087218 1EGJ8360018 MX2K-UNIVERSAL-HV-PDM PDM 3 REV 01 740-087218 1EGJ8360017 MX2K-UNIVERSAL-HV-PDM
Most components also have a small rectangular serial number ID label attached to the component body (see Figure 1).
Figure 1: Serial Number ID Label
