- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- MX480 Router Description
- MX480 Chassis
- MX480 Cooling System
- MX480 Air Deflector Kits
- MX480 Power System Description
- MX480 AC Power System
- MX480 DC Power System
- MX480 Host Subsystem
- MX480 Interface Modules—DPCs
- MX480 Interface Modules—FPCs and PICs
- MX480 Interface Modules—MPCs and MICs
- Services Processing Card—MX-SPC3 Services Card
- MX-Series Switch Control Board (SCB) Description
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- play_arrow Maintaining Components
- Maintaining MX480 Components
- Maintaining MX480 Cooling System Components
- Maintaining MX480 Host Subsystem Components
- Maintaining MX480 Interface Modules
- Maintaining MX-SPC3 Services Card
- Maintaining MX480 Power System Components
- Maintaining MX480 SFP and XFP Transceivers
- Maintaining MX480 Switch Control Boards
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
MX480 Agency Approvals and Compliance Statements
Agency Approvals for MX480 Routers
The routers comply with the following standards:
Safety
EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification, Requirements and User's Guide
CSA 60950-1 Safety of Information Technology Equipment
UL 60950-1 Safety of Information Technology Equipment
EN 60950-1 Safety of Information Technology Equipment
IEC 60950-1 Safety of Information Technology Equipment (with country deviations)
EMC/EMI/ETSI
AS/NZS CISPR22 (Australia/New Zealand)
EN55022 Class A European Radiated Emissions
FCC Part 15 Class A USA Radiated Emissions
VCCI Class A Japanese Radiated Emissions
ETSI EN-300386 V1.3.3 Telecommunication Network Equipment. Electromagnetic Compatibility Requirements
Immunity
EN 55024 +A1+A2 Information Technology Equipment Immunity Characteristics
EN-61000-3-2 Power Line Harmonics
EN-61000-3-3 +A1 +A2 +A3 Power Line Voltage Fluctuations and Flicker
EN-61000-4-2 +A1 +A2 Electrostatic Discharge
EN-61000-4-3 +A1+A2 Radiated Immunity
EN-61000-4-4 Electrical Fast Transients
EN-61000-4-5 Surge
EN-61000-4-6 Immunity to Conducted Disturbances
EN-61000-4-11 Voltage Dips and Sags
NEBS
GR-1089-Core: EMC and Electrical Safety for Network Telecommunications Equipment
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
GR-63-Core: NEBS, Physical Protection
Compliance Statement for Argentina
EQUIPO DE USO IDÓNEO.
Compliance Statements for EMC Requirements
Canada
CAN ICES-3 (A)/NMB-3(A)
European Community
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures.
Israel
Translation from Hebrew—Warning: This product is Class A. In residential environments, the product might cause radio interference, and in such a situation, the user might be required to take adequate measures.
Japan
The preceding translates as follows:
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this product is used near a radio or television receiver in a domestic environment, it might cause radio interference. Install and use the equipment according to the instruction manual. VCCI-A.
United States
The hardware equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Compliance Statements for Environmental Requirements
Batteries in this product are not based on mercury, lead, or cadmium substances. The batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC, and 98/101/EEC. The product documentation includes instructional information about the proper method of reclamation and recycling.
Compliance Statements for Data Center
The equipment is suitable for installation as part of the Common Bonding Network (CBN).
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (that is, DC-I), as defined in GR-1089-CORE.
You must provision a readily accessible device outside of the equipment to disconnect power. The device must also be rated based on local electrical code practice.
