Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Verifying the MX960 Parts Received

A packing list is included in each shipment. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and descriptions of each part in your order.

If any part is missing, contact a customer service representative.

A fully configured router contains the router chassis with installed components, listed in Table 1, and an accessory box, which contains the parts listed in Table 2. The parts shipped with your router can vary depending on the configuration you ordered.

Table 1: Parts List for a Fully Configured MX960 Router

Component

Quantity

Chassis, including midplane, craft interface, front-mounting flanges, and center-mounting brackets

1

DPCs

Up to 12

FPCs

Up to 6

MPCs

Up to 12

MICs

Up to 24

PICs

Up to 12

Routing Engines

1 or 2

SCBs

Up to 3

Power supplies

Up to 4

Fan trays

2

Air filter

1

Air filter tray

1

Quick start installation instructions

1

Large mounting shelf

1

Small mounting shelf

1

Blank panels for slots without components installed

One blank panel for each slot not occupied by a component

Table 2: Accessory Box Parts List

Part

Quantity

Screws to mount chassis

14

DC power terminal Lugs, 4-AWG

8

Terminal block plug, 3 pole, 5.08 mm spacing, 12A, to connect the router alarms

2

Label, accessories contents, MX960

1

USB flash drive with Junos

1

Read me first document

1

Affidavit for T1 connection

1

Juniper Networks Product Warranty

1

End User License Agreement

1

Document sleeve

1

3" x 5" pink bag

2

9" x 12" pink bag, ESD

2

Accessory Box, 19 x 12 x 3"

1

ESD wrist strap with cable

1

Note:

We no longer include the RJ-45 console cable with the DB-9 adapter as part of the device package. If the console cable and adapter are not included in your device package, or if you need a different type of adapter, you can order the following separately:

  • RJ-45 to DB-9 adapter (JNP-CBL-RJ45-DB9)

  • RJ-45 to USB-A adapter (JNP-CBL-RJ45-USBA)

  • RJ-45 to USB-C adapter (JNP-CBL-RJ45-USBC)

If you want to use RJ-45 to USB-A or RJ-45 to USB-C adapter you must have X64 (64-Bit) Virtual COM port (VCP) driver installed on your PC. See, https://ftdichip.com/drivers/vcp-drivers/ to download the driver.