- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- play_arrow Troubleshoot the Hardware
- play_arrow Contact Customer Support and Return the Chassis or Components
- play_arrow Safety and Compliance Information
- General Safety Guidelines and Warnings
- Definitions of Safety Warning Levels
- Qualified Personnel Warning
- Warning Statement for Norway and Sweden
- Fire Safety Requirements
- Installation Instructions Warning
- Chassis and Component Lifting Guidelines
- Restricted Access Warning
- Ramp Warning
- Rack-Mounting and Cabinet-Mounting Warnings
- Grounded Equipment Warning
- Laser and LED Safety Guidelines and Warnings
- Radiation from Open Port Apertures Warning
- Maintenance and Operational Safety Guidelines and Warnings
- General Electrical Safety Guidelines and Warnings
- Action to Take After an Electrical Accident
- Prevention of Electrostatic Discharge Damage
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- DC Power Electrical Safety Guidelines
- DC Power Copper Conductors Warning
- DC Power Disconnection Warning
- DC Power Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Multiple Power Supplies Disconnection Warning
- TN Power Warning
- PTX10001-36MR Agency Approvals and Compliance Statements
Uninstall the PTX10001-36MR
Remove the PTX10001-36MR from a Rack or Cabinet
Before removing a PTX10001-36MR from a rack:
Here’s what you’ll need to relocate the PTX10001-36MR:
Two people. One to hold the rack while the other one removes the screws.
Screwdriver appropriate for your rack-mounting screws.
If you need to relocate an installed PTX10001-36MR, use the procedure described in this topic. (The remainder of this topic uses “rack” to mean “rack or cabinet.” )
When you remove multiple devices from a rack, remove the device at the top of the rack first and proceed to remove the rest of the devices from top to bottom.
Ensure that the rack is stable and secured to the building.
Ensure that there is enough space to place the removed PTX10001-36MR in its new location and along the path to the new location.
Read General Safety Guidelines and Warnings and PTX10001-36MR Installation Safety Guidelines.
Power off the device (see Power Off the PTX10001-36MR).
Disconnect the power cords.
Ensure that you have disconnected any cables or wires attached to the PTX10001-36MR (see Disconnect a Fiber-Optic Cable from the PTX10001-36MR).
To remove a PTX10001-36MR from a rack:
- Have one person support the weight of the device while another person uses the screwdriver to remove the front mounting screws that attach the chassis mounting brackets to the rack.
- Remove the PTX10001-36MR from the rack.
- Use the screwdriver to remove the mounting screws that attach the mounting blades attached to the rear of the rack.
- Place the removed screws and rear mounting blades in a labeled bag. You will need them when you reinstall the chassis.
- Transport the PTX10001-36MR to the new location.
