Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

close

keyboard_arrow_left

Table of Contents Expand all

play_arrow Fast Track: Initial Installation
- Fast Track to Rack Installation and Power
- Onboard, Configure, and Monitor the PTX10004
play_arrow Overview
play_arrow Site Planning, Preparation, and Specifications
play_arrow Initial Installation and Configuration
play_arrow Maintaining Components
play_arrow Troubleshooting Hardware
- How to Troubleshoot PTX10004 Error Conditions
play_arrow Contacting Customer Support and Returning the Chassis or Components
- Contact Customer Support
- Return Procedures for the PTX10004 Chassis or Components
play_arrow Safety and Compliance Information

list Table of Contents

English

keyboard_arrow_right

Chassis and Component Lifting Guidelines

date_range 19-Oct-22

arrow_backward

arrow_forward

Before moving the device to a site, ensure that the site meets the power, environmental, and clearance requirements.
Before lifting or moving the device, disconnect all external cables and wires.
As when lifting any heavy object, ensure that your legs bear most of the weight rather than your back. Keep your knees bent and your back relatively straight. Do not twist your body as you lift. Balance the load evenly and be sure that your footing is firm.
Use the following lifting guidelines to lift devices and components:
- Up to 39.7 lb (18 kg): One person.
- From 39.7 lb (18 kg) to 70.5 lb (32 kg): Two or more people.
- From 70.5 lb (32 kg) to 121.2 lb (55 kg): Three or more people.
- Above 121.2 lb (55 kg): Use material handling systems (such as levers, slings, lifts, and so on). When this is not practical, engage specially trained persons or systems (such as riggers or movers).

arrow_backward PREVIOUS Installation Instructions Warning

NEXT arrow_forward Restricted Access Warning

footer-navigation