- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- PTX10016 Installation Overview
- Unpack the PTX10016 Router
- Mount the PTX10016 by Using the JNP10004-RMK-4POST Rack Mount Kit
- Mount the PTX10016 by Using the EX-MOD-RMK-4POST Rack Mount Kit
- Install and Maintain the Front Door and its Components on the PTX10016 Router
- Connect the PTX10016 Router to Power
- Connect the PTX10016 Router to External Devices
- Register Products—Mandatory to Validate SLAs
- Perform the Initial Configuration for the PTX10016 Router
- play_arrow Maintain Components
- Maintain the PTX10016 Routing and Control Boards
- Maintain the PTX10016 Cooling System Components
- Maintain the PTX10016 Power System Components
- Maintain the PTX10016 Switch Fabric Components
- Maintain the PTX10016 Line Cards
- Maintain the PTX10016 Transceivers and Fiber-Optic Cables
- Remove the PTX10016 Router from the Rack
- play_arrow Troubleshoot Hardware
- play_arrow Contact Customer Support and Return the Chassis or Components
- play_arrow Safety and Compliance Information
- General Safety Guidelines and Warnings
- Definitions of Safety Warning Levels
- Qualified Personnel Warning
- Warning Statement for Norway and Sweden
- Fire Safety Requirements
- Installation Instructions Warning
- Chassis and Component Lifting Guidelines
- PTX10016 Chassis Lifting Guidelines
- Restricted Access Warning
- Ramp Warning
- Rack-Mounting and Cabinet-Mounting Warnings
- Grounded Equipment Warning
- Radiation from Open Port Apertures Warning
- Laser and LED Safety Guidelines and Warnings
- Maintenance and Operational Safety Guidelines and Warnings
- General Electrical Safety Guidelines and Warnings
- Action to Take After an Electrical Accident
- Prevention of Electrostatic Discharge Damage
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- DC Power Electrical Safety Guidelines for the PTX10008 and PTX10016 Routers
- DC Power Copper Conductors Warning
- DC Power Disconnection Warning
- DC Power Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Multiple Power Supplies Disconnection Warning
- TN Power Warning
- Fire Safety Requirements
- PTX10008 and PTX10016 Agency Approvals and Compliance Statements
PTX10016 Packet Transport Router Hardware Guide
Use this guide to install hardware and perform initial software configuration, routine maintenance, and troubleshooting for the PTX10016 Packet Transport Router.
After completing the installation and basic configuration procedures covered in this guide, refer to the Junos OS and the Junos OS Evolved documentation for information about further software configuration.
If your PTX10016 has JNP10016-SF Switch Interface Boards (SIBs), refer to the Junos OS documentation. If your PTX10016 has JNP10016-SF3 SIBs, refer to the Junos OS Evolved documentation.