- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- PTX10016 Installation Overview
- Unpack the PTX10016 Router
- Mount the PTX10016 by Using the JNP10004-RMK-4POST Rack Mount Kit
- Mount the PTX10016 by Using the EX-MOD-RMK-4POST Rack Mount Kit
- Install and Maintain the Front Door and its Components on the PTX10016 Router
- Connect the PTX10016 Router to Power
- Connect the PTX10016 Router to External Devices
- Register Products—Mandatory to Validate SLAs
- Perform the Initial Configuration for the PTX10016 Router
- play_arrow Maintain Components
- Maintain the PTX10016 Routing and Control Boards
- Maintain the PTX10016 Cooling System Components
- Maintain the PTX10016 Power System Components
- Maintain the PTX10016 Switch Fabric Components
- Maintain the PTX10016 Line Cards
- Maintain the PTX10016 Transceivers and Fiber-Optic Cables
- Remove the PTX10016 Router from the Rack
- play_arrow Troubleshoot Hardware
- play_arrow Contact Customer Support and Return the Chassis or Components
AC Power Electrical Safety Guidelines
The following electrical safety guidelines apply to AC-powered devices:
Note the following warnings printed on the device:
“CAUTION: THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD. DISCONNECT ALL POWER SUPPLY CORDS BEFORE SERVICING TO AVOID ELECTRIC SHOCK.”
“ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE PRÉVENIR LES CHOCS ÉLECTRIQUES, DÉBRANCHER TOUT CORDON D'ALIMENTATION AVANT DE FAIRE LE DÉPANNAGE.”
AC-powered devices are shipped with a three-wire electrical cord with a grounding-type plug that fits only a grounding-type power outlet. Do not circumvent this safety feature. Equipment grounding must comply with local and national electrical codes.
You must provide an external certified circuit breaker (2-pole circuit breaker or 4-pole circuit breaker based on your device) rated minimum 20 A in the building installation.
The power cord serves as the main disconnecting device for the AC-powered device. The socket outlet must be near the AC-powered device and be easily accessible.
For devices that have more than one power supply connection, you must ensure that all power connections are fully disconnected so that power to the device is completely removed to prevent electric shock. To disconnect power, unplug all power cords (one for each power supply).
Power Cable Warning (Japanese) |
|---|
Warning: The attached power cable is only for this product. Do not use the cable for another product.  |
