- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- PTX10016 Installation Overview
- Unpack the PTX10016 Router
- Mount the PTX10016 by Using the JNP10004-RMK-4POST Rack Mount Kit
- Mount the PTX10016 by Using the EX-MOD-RMK-4POST Rack Mount Kit
- Install and Maintain the Front Door and its Components on the PTX10016 Router
- Connect the PTX10016 Router to Power
- Connect the PTX10016 Router to External Devices
- Register Products—Mandatory to Validate SLAs
- Perform the Initial Configuration for the PTX10016 Router
- play_arrow Maintain Components
- Maintain the PTX10016 Routing and Control Boards
- Maintain the PTX10016 Cooling System Components
- Maintain the PTX10016 Power System Components
- Maintain the PTX10016 Switch Fabric Components
- Maintain the PTX10016 Line Cards
- Maintain the PTX10016 Transceivers and Fiber-Optic Cables
- Remove the PTX10016 Router from the Rack
- play_arrow Troubleshoot Hardware
- play_arrow Contact Customer Support and Return the Chassis or Components
Ramp Warning
When installing the device, do not use a ramp inclined at more than 10 degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10 graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus ylittää 10 astetta.
Avertissement Ne pas utiliser une rampe dont l'inclinaison est supérieure à 10 degrés.
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados.
Varning! Använd inte ramp med en lutning på mer än 10 grader.