- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- PTX5000 Installation Overview
- Unpacking the PTX5000
- Installing the PTX5000 in a Rack
- Connecting the PTX5000 Grounding Cable
- Connecting the PTX5000 to AC Power
- Connecting the PTX5000 to DC Power
- Connecting the PTX5000 to External Devices
- Installing the Front Doors on the PTX5000
- Powering the PTX5000 On and Off
- Performing the Initial Software Configuration for the PTX5000
- play_arrow Maintaining Components
- Maintaining the PTX5000 Chassis
- Maintaining the PTX5000 Cooling System
- Maintaining the PTX5000 AC Power System
- Maintaining the PTX5000 DC Power System
- Upgrading the PTX5000 to a High Capacity Power System
- Maintaining the PTX5000 Host Subsystem
- Upgrading the PTX5000 Host Subsystem
- Maintaining the PTX5000 Switch Interface Boards
- Maintaining PTX5000 Interface Modules
- Upgrading the PTX5000 FPCs
- play_arrow Troubleshooting Hardware
- play_arrow Returning the Chassis or Components
- play_arrow Safety and Compliance Information
- General Safety Guidelines and Warnings
- Definitions of Safety Warning Levels
- Qualified Personnel Warning
- Warning Statement for Norway and Sweden
- Fire Safety Requirements
- Installation Instructions Warning
- Chassis and Component Lifting Guidelines
- Restricted Access Warning
- Ramp Warning
- Rack-Mounting and Cabinet-Mounting Warnings
- Grounded Equipment Warning
- Radiation from Open Port Apertures Warning
- Laser and LED Safety Guidelines and Warnings
- Maintenance and Operational Safety Guidelines and Warnings
- PTX5000 Agency Approvals and Compliance Statements
- General Electrical Safety Guidelines and Warnings
- Action to Take After an Electrical Accident
- Prevention of Electrostatic Discharge Damage
- PTX5000 AC Power Electrical Safety Guidelines
- PTX5000 AC Power Electrical Safety Warnings
- AC Power Disconnection Warning
- PTX5000 DC Power Electrical Safety Guidelines
- DC Power Copper Conductors Warning
- DC Power Disconnection Warning
- DC Power Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Midplane Energy Hazard Warning
- Multiple Power Supplies Disconnection Warning
- TN Power Warning
PTX5000 Packet Transport Router Hardware Guide
Use this guide to install hardware and perform initial software configuration, routine maintenance, and troubleshooting for the PTX5000 Packet Transport Router.
After completing the installation and basic configuration procedures covered in this guide, refer to the Junos OS documentation for information about further software configuration.