Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Unpack the SRX2300

SUMMARY Unpack the appliance using the recommended tools and following the recommended procedure.

Tools and Parts Required to Unpack the SRX2300 Appliance

To unpack the appliance and prepare for installation, you need the following tools:

  • Phillips (+) screwdriver, number 2

  • A box cutter or packing knife to slice open the tape that seals the boxes

Unpack an SRX2300

We ship the SRX2300 in a cardboard carton and secure it with foam packing material.

Note:

The SRX2300 has maximum protection inside the cardboard carton. Do not unpack it until you are ready to begin installation.

To unpack the SRX2300:

  1. Move the cardboard carton to a staging area as close to the installation site as possible. Make sure that you have enough room to remove the components from the chassis.
  2. Position the cardboard carton with the arrows pointing up.
  3. Carefully open the top of the cardboard carton.
  4. Remove the foam covering the top of the SRX2300.
  5. Verify the parts received against the list in Table 1.
  6. Store the brackets and bolts inside the accessory box.
  7. Save the shipping carton and packing materials in case you need to move or ship the appliance at a later time.

Verify Parts Received with the SRX2300

The shipment includes a packing list. Check the parts you receive in the shipping carton against the items on the packing list. We ship the parts as per the configuration you order.

If any part on the packing list is missing, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or direct-dial options in countries without toll-free numbers, see https://www.juniper.net/support/requesting-support.html.

Table 1: Parts List for the SRX2300
Component Quality

SRX2300 Chassis

Part number: SRX2300-CHAS

1

Power supply unit

1 AC

Fan

4

AC power cord that is appropriate for your geographical location

1 (only for AC models)

Rack mount kit

1

Documentation Roadmap

1
Note:

We ship the SRX2300 with only one power supply unit (PSU). You can order the second power supply separately, if required.