- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Maintain Components
- play_arrow Troubleshoot Hardware
- play_arrow Contact Customer Support and Return the Chassis or Components
- play_arrow Safety and Compliance Information
Unpack the SRX4700
Unpack the firewall using the recommended tools and following the recommended procedure.
Tools and Parts Required to Unpack the SRX4700 Firewall
To unpack the SRX4700 and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
A box cutter or packing knife to slice open the tape that seals the boxes
Unpack an SRX4700
We ship the SRX4700 in a cardboard carton and secure it with foam packing material.
The SRX4700 has maximum protection inside the cardboard carton. Do not unpack it until you are ready to begin installation.
To unpack the SRX4700:
- Move the cardboard carton to a staging area as close to the installation site as possible. Make sure that you have enough room to remove the components from the chassis.
- Position the cardboard carton with the arrows pointing up.
- Carefully open the top of the cardboard carton.
- Remove the foam covering the top of the SRX4700.
- Verify the parts received against the list in Table 1.
- Store the brackets and bolts inside the accessory box.
- Save the shipping carton and packing materials in case you need to move or ship the firewall at a later time.
Verify Parts Received with the SRX4700
The shipment includes a packing list. Check the parts you receive in the shipping carton against the items on the packing list. We ship the parts as per the configuration you order.
If any part on the packing list is missing, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or direct-dial options in countries without toll-free numbers, see https://www.juniper.net/support/requesting-support.html.
| Component | Quality |
|---|---|
SRX4700 chassis Part number: SRX4700-CHAS | 1 |
Power supply unit (PSU) | 2 AC or 2 DC |
Fan | 6 |
Power cord that is appropriate for your geographical location | 2 AC (only for AC models) |
Rack mount kit | 1 |
Documentation Roadmap | 1 |
