close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- play_arrow Contacting Customer Support and Returning the Chassis or Components
- play_arrow Safety and Compliance Information
- Definitions of Safety Warning Levels
- General Safety Guidelines and Warnings
- Restricted Access Warning
- Qualified Personnel Warning
- Prevention of Electrostatic Discharge Damage
- Fire Safety Requirements
- Laser and LED Safety Guidelines and Warnings
- Chassis and Component Lifting Guidelines
- Radiation from Open Port Apertures Warning
- Maintenance and Operational Safety Guidelines and Warnings
- Action to Take After an Electrical Accident
- General Electrical Safety Guidelines and Warnings
- SSR1400 Agency Approvals
- FCC and EMC Declarations
- Lithium Battery Declaration
list Table of Contents
Maintaining the SSR1400 Hardware Components
date_range
16-Sep-22
To maintain optimum performance of the appliance, you must regularly perform the following preventive maintenance procedures:
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Ensure that airflow is unobstructed around the appliance and into the air intake vents.
The power supplies, fans, and transceivers are the only FRUs that can be replaced on the SSR1400. For any other issues, contact Juniper customer support. See Contacting Customer Support and Returning the Chassis or Components.
