Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

header-navigation
keyboard_arrow_up
close
keyboard_arrow_left
list Table of Contents
file_download PDF
{ "lLangCode": "en", "lName": "English", "lCountryCode": "us", "transcode": "en_US" }
English
keyboard_arrow_right

Update Apstra GUI Version

date_range 30-May-23

When it's available, you can install an optional Apstra server GUI update to add web interface functionality. This is independent of the Apstra server backend and does not affect the state of the Apstra server or the established configuration.

  1. Download the web UI run file from Juniper Support Downloads.
  2. Upload the file to the Apstra server. For this example, the file is named aos-web-ui_2.2.0-67.run.
  3. From the Apstra server CLI, as root user, run the file as shown in the example below.
    content_copy zoom_out_map
    admin@aos-server:~$ sudo -s
    [sudo] password for admin:
    root@aos-server:~# bash aos-web-ui_2.2.0-67.run
    Verifying archive integrity... All good.
    Uncompressing AOS WebUI installer  100%
    ### Backing up existing AOS WebUI into /opt/aos/frontend/snapshot/2018-02-25_20-34-15 ...
    ### Copying AOS WebUI file into aos_controller_1 ...
    ### Initializing new AOS WebUI ...
    ### Done!
    root@aos-server:~#

    The current GUI version is copied to the /opt/aos/frontend/snapshot/ directory.

  4. From the Apstra GUI, from the left navigation menu, navigate to Platform > About to confirm that the Juniper Apstra UI version has been updated.
footer-navigation