Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Announcement: Try the Ask AI chatbot for answers to your technical questions about Juniper products and solutions.

close
header-navigation
keyboard_arrow_up
close
keyboard_arrow_left
list Table of Contents
file_download PDF
{ "lLangCode": "en", "lName": "English", "lCountryCode": "us", "transcode": "en_US" }
English
keyboard_arrow_right

Show Tech: Onbox Agents (CLI)

Release: Juniper Apstra 4.1
{}
Change Release
date_range 30-May-23

We recommend using the Apstra GUI to obtain onbox agent show tech files, but you have the option of using the Apstra server Linux CLI instead, as described below.

  1. SSH to the device.
  2. For Arista only, run bash to go the Arista Networks EOS shell.
  3. For Cisco only, run guestshell.
  4. From the device, run the sudo aos_show_tech --platform <platform> command where <platform> is the platform you're using: eos, nxos, or sonic. The file is generated and copied to the /tmp directory. See below for SONiC example:
    content_copy zoom_out_map
    admin@l2-virtual-ext-001-leaf1:mgmt-vrf:~$ sudo aos_show_tech --platform sonic
    AOS show tech generated at /tmp/aos_show_tech_20200401_034527.tar.gz
    admin@l2-virtual-ext-001-leaf1:mgmt-vrf:~$
  5. Locate the file archive in the /tmp directory (for example, aos_show_tech_20200401_034527.tar.gz) and copy it, via SCP, to a local computer with the ability to upload.
  6. Upload the show tech file to your customer case.
footer-navigation