Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Update Config Template Assignment (Freeform)

SUMMARY You can update Freeform config template assignments on one or more systems.

Update Config Template Assignment on One System (from Systems)

If you haven't created your config templates yet, do that now.

  1. From the blueprint, navigate to Staged > Physical > Systems and click the system name to go to details for that system.
    Note:

    You can also get to the Systems details page from the Topology view. From the blueprint, navigate to Staged > Physical > Topology and select the system to update.
  2. In the panel on the right, in the Devices tab, click the Edit button for the Config Template field.
  3. Select the config template from the drop-down list, then click the Save button. (Or, to cancel the change, click the gray discard button. Or, to remove the config template, click the red remove button.)
    The panel shows the value for the active blueprint and the staged value
When you're ready to activate your changes, commit them from the Uncommitted tab.

Update Config Template Assignment (Multiple Systems)

Internal systems with deploy mode set to Deploy require an assigned config template.

If you haven't created your config templates yet, do that now.

  1. From the blueprint, navigate to Staged > Physical > Systems to go to the Systems view.
  2. Select one or more check boxes for the system(s) to update. (The same action will be applied to all selected systems. That is, all selected systems will be assigned or unassigned the same config template.)
  3. Click the Update Config Template Assignments button that appears above the table.
  4. To add or replace a config template assignment, leave Override Assignment selected and select a config template from the drop-down list. The template text appears for your review. (Each internal system is assigned only one config template, but that config template could nest other config templates within it.)
  5. Or, to remove a config template assignment, select Remove Assignment.
  6. Click Assign Config Template (or Remove Config Template Assignments, as applicable) to stage the changes and return to the Systems view.
When you're ready to activate your changes, commit them from the Uncommitted tab.