Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuration Wizard

Configuration Wizard Prompts

Customer Response Actions

Use DHCP to obtain the IP address and DNS server address for the administrative interface (Yes/No)?

Note:

Only if your DHCP response is no,enter the following information when prompted:

  1. IP address

  2. Netmask

  3. Enter a gateway IP address for this management (administrative) interface:

  4. Enter primary DNS server IP address.

  5. Do you have a secondary DNS Server (Yes/No).

  6. Do you want to enter the search domains?

  7. Enter the search domain (separate multiple search domains by space):

Restart the administrative interface (Yes/No)?

We strongly discourage the use of DHCP addressing for the eth0 interface because it changes dynamically. A static IP address is preferred.

Recommended: Respond with no:

Enter a gateway IP X.X.X.X and quad-tuple netmask using the form 255.255.255.0 (no CIDR format).

  1. Enter an IP address

  2. Enter a netmask

  3. Enter a gateway IP address.

  4. Enter the DNS server IP address

  5. If yes, enter the IP address of the secondary DNS server.

  6. Enter yes if you want DNS lookups to use a specific domain.

  7. Enter search domain(s) separated by spaces; for example: example.com lan.com dom2.com

Enter yes to restart with the new configuration settings applied.

Enter a valid hostname.

Type a hostname when prompted; do not include the domain; for example: macosx

Enter the following server attributes:

Central Manager (CM) IP Address:

Device Name: (must be unique)

Device Description

Device Key PassPhrase

Note:

Remember this passphrase and use for all distributed devices!

Enter the IP address of the Juniper ATP Appliance CM external IP address, not the loopback.

Enter a Mac Mini Device running Juniper ATP software Name; this identifies the Mac Mini in the Web UI.

Enter a device Description

Enter the same PassPhrase used to authenticate the Mac Mini to the Central Manager.
Note:

Enter CTRL-C to exit the Configuration Wizard at any time. If you exit without completing the configuration, you will be prompted again whether to run the Configuration Wizard. You may also rerun the Configuration Wizard at any time with the CLI command wizard. Please refer to the Operator’s Guide for further information regarding the Juniper ATP Appliance command line.

When the Configuration Wizard exits to display the CLI, use the following commands to view interface configurations and to allowlist an Email Collector (in distributed systems) if one is installed and configured. To exit the CLI, type exit.

Related Documentation