AWS vCore Instance Requirements
The AWS vCore is launched from the Juniper ATP Appliance vCore AMI. It must satisfy the following requirements:
The network interface should be in DHCP mode
Any firewall rules must allow access to the vCore AMI instance once it is imported
The CM/Core virtual instance must have a public IP address only if it needs to be accessed from the Internet. If the CM/Core is only to be accessed from within the VPC connecting to the corporate private networks, a public IP address may not be needed. Proper security group rules should be set to limit appropriate inbound and outbound traffic.
Once a vCore instance is created, the vCore instance volume will stay in the particular AWS region of the EC2 for which it was defined.