Using Contrail Tools
Contrail-tools container provides centralized location for all the available tools and CLI commands in one place.
Starting with Contrail
Networking Release 2008, contrail-tools command will be
installed by default.
contrail-tools command enables you to log in to the
contrail-tools container and execute the tool. Additionally, the command
will kill the container on exit.
Table 1 provides a list of available tools and CLI options in the contrail-tools package.
Tools and CLI commands |
Description |
|---|---|
dpdkinfo |
Adds support to display bond, lacp, Nic, mempool, core, and app information. |
dpdkvifstats.py |
Display the PPS statistics of DPDK vRouter. |
dropstats |
Inspects packet drop counters in the vRouter. |
flow |
Displays active flows in the system. |
mirror |
Displays the mirror table entries. |
mpls |
Displays the input label map programmed into the vRouter. |
nh |
Displays the next hops that the vRouter knows. |
rt |
Displays routes in virtual routing and forwarding (VRF). |
sandump |
Captures the Sandesh messages from the netlink connection between Agent and vRouter. |
vif |
Inspects vRouter interfaces associated with the vRouter module. |
vifdump |
Captures and analyzes packets from DPDK interface. |
vrfstats |
Displays the next hop statistics for the VRF. |
vrftable |
Displays the interface mapping for each VRF for a host-based firewall feature. |
vrinfo |
Displays internal state of DPDK/Kernel vRouter. |
vrmemstats |
Displays the vRouter memory usage statistics. |
vrouter |
Display the vRouter information. |
vxlan |
Displays the vxlan table entries. |
There are 2 ways to execute the contrail-tools command:
Execute
contrail-toolscommand to login to the container.For example:
[root]# contrail-tools (contrail-tools)[root /]$ vif Usage: vif [--create <intf_name> --mac <mac>] [--add <intf_name> --mac <mac> --vrf <vrf> --type [vhost|agent|physical|virtual|monitoring] --transport [eth|pmd|virtual|socket] --xconnect <physical interface name> --policy, --vhost-phys, --dhcp-enable] --vif <vif ID> --id <intf_id> --pmd --pci] [--delete <intf_id>|<intf_name>] [--get <intf_id>][--kernel][--core <core number>][--rate] [--get-drop-stats] [--set <intf_id> --vlan <vlan_id> --vrf <vrf_id>] [--list][--core <core number>][--rate] [--sock-dir <sock dir>] [--help]
Execute
contrail-toolscommand with the CLI as argument.For example:
[root]# contrail-tools vif Usage: vif [--create <intf_name> --mac <mac>] [--add <intf_name> --mac <mac> --vrf <vrf> --type [vhost|agent|physical|virtual|monitoring] --transport [eth|pmd|virtual|socket] --xconnect <physical interface name> --policy, --vhost-phys, --dhcp-enable] --vif <vif ID> --id <intf_id> --pmd --pci] [--delete <intf_id>|<intf_name>] [--get <intf_id>][--kernel][--core <core number>][--rate] [--get-drop-stats] [--set <intf_id> --vlan <vlan_id> --vrf <vrf_id>] [--list][--core <core number>][--rate] [--sock-dir <sock dir>] [--help]
contrail-tools command will be
installed by default.